Jump to content
SAU Community

Recommended Posts

im going to do new plugs on next service in 500km any suggestions?

im going to get a high flow panel filter and ill clean the afm no problems

but atm probably cant afford a O2 sensor

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

ive never had the light on the dash and have twice had the pin under the empty line

pretty sure that the low fuel light is operated seperately to the dash gauge. as i said earlier, it generally comes on with around 10L left before empty, so if you have never gotten down to a point where it has taken over 55L to fill then you haven't gotten the tank low enough

pretty sure that the low fuel light is operated seperately to the dash gauge. as i said earlier, it generally comes on with around 10L left before empty, so if you have never gotten down to a point where it has taken over 55L to fill then you haven't gotten the tank low enough

correcto mutcho, when you pull the sender unit out you can see a switch thing on the very bottom of sender unit itself but it will only work if the float touches the switch on the unit. So if the sender is giving false readings saying your are empty (fuel gauge can be on 'E') but then the float will not be in contact with the switch on the assembely because you still have more fuel than what its showing on the gauge.

Edited by central coast person

im going to do new plugs on next service in 500km any suggestions?

im going to get a high flow panel filter and ill clean the afm no problems

but atm probably cant afford a O2 sensor

well im not sure what to say but the fact is that its the O2 sensor that causes poor economy, particularly if u are still getting poor economy when driving the car nicely.

They are less than $100 delivered from the business traders on here n u can change it yourself- peice of piss...

do you have an ECU you can tune with?

If not

I dare to to put a tank load of E85 in the car and run on the standard ECU....post video's for lulz

i dare him to put a tank of e85 in and then try to drive out of the driveway of the servo without needing a towtruck, LOL

fixed your post for lulz

=.=

Just an FYI, my search for a glaring face on the internet lead me to imgur.

From there I proceded to redit.

From there, I proceded to very random places.

And hour later, I had forgotten about this post until I was closing my tabs ><

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...