Jump to content
SAU Community

R33 Intake, What Fuel Rail (R32/33/34) Gives The Most Injector Options?


Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

so do you guys have experience using that deatschwerks injectors? prices look good

just got my motor going again with some 1000cc side feed deatschwerks. had a little trouble with the latency but all sorted now and idle just as well as the nismo 555s they replaced. can drive around at low revs and idle like a stocker with enough fuel capacity for 800+hp

The 740s are only $50 more than the 550s, there is no reason to not get them is there? Only aiming for 250kw, maybe 300 in the future but I see 250 being plenty for quite some time.

Edited by Rolls

Hi Rolls i just did the injectors on my 34 gtt with stock rail and there are so many options.

Bosch ev14 injectors come in many sizes.

Sard

Nismo

Deatchwerks

Seimens

List goes on

All the ones i listed are bolt in. You dont need spacers or adaptor.

The only change needed is the plugs are different.

The bosch EV14 injectors come in sizes up to ID 1000 cc

You need to buy the 3/4 injectors for a neo. I just put them in my 34 with stock rail stock intake.

I paid 550ish for injectors 180ish to install and under half a hour to tune.

Plus RB20's use side feed injectors neo's use top feed

Edited by whitneybra

Rolls im in the same boat as you, im also looking for injectors that are regency friendly with the stock fuel rail, either going to go nismo or deatchwerks, im pretty sure the deatchwerks are just a highflowed stock injector? if anyone can confirm...so should be same colour etc.

Hi Rolls i just did the injectors on my 34 gtt with stock rail and there are so many options.

Bosch ev14 injectors come in many sizes.

Sard

Nismo

Deatchwerks

Seimens

List goes on

Nismo only come in 480cc which is too small imo, especially if you ever want to run E85.

The destschwerks are the only option that are truly direct fit. The rest require some form of modification to work.

Yeah going to buy the 740s, not cheap but I want to pass and want room to move in the future if I want to try E85 or aim for 280kw

Thanks for the help everyone!

Edited by Rolls

Yeah going to buy the 740s, not cheap but I want to pass and want room to move in the future if I want to try E85 or aim for 280kw

Thanks for the help everyone!

where are you purchasing them from mate?

Thanks everyone for correcting me about the rb20 injectors

www.tuffcarparts.com shoot these guys a email they sell lots and there was even a group buy here on SAU

Edited by whitneybra

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...