Jump to content
SAU Community

Recommended Posts

post-41430-0-43273200-1319595054_thumb.jpgHey all, my cruise control has been playing up. I set the factory cruise control to what ever speed, and it works as it should. Then after 3 and a half minutes it beeps, a second orange cruise control light comes on and I get this pic on my tv screen. Anyone know what this says on my screen? (I suspect its just "Cruise control fault"?) And has anyone else had this problem with there factory m35 radar cruise? Thanks Edited by MOUTH
Link to comment
https://www.sau.com.au/forums/topic/381237-m35-factory-cruise-control-issue/
Share on other sites

Go see Brad (ducati02) and get the screen translated! That'll help!

Hey mate, yeah I have already seen brad, my factory dvd/gps drive is stuffed, need a new one to be able to load the conversion. So he ended up just putting a video block on so I can still watch the screen without the handbrake on. Buying another dvd/gps unit is up there on my priority list, but definately not the first thing.

Go see Brad (ducati02) and get the screen translated! That'll help!

Not all screens, ie error messages, have been translated. My airbag error message just disappeared after the English translation. The Russians did a good job, but only did the 'normal' screens from what I can see and ignored all the other potentially helpful messages.

I have never seen that screen before. Saying that I havent faulted my factory cruise control yet to bring it up.

Mine beeps at oncoming traffic.

You could try taking the grill off and cleaning the cover on both sides under the nissan badge. It could be that dirty that its blocking the radar or it thinks something is there. Or check the plug. Is it always 3.5min or is it more randam?

Has anyone got a spare DVD rom for MOUTH :whistling:

I have never seen that screen before. Saying that I havent faulted my factory cruise control yet to bring it up.

Mine beeps at oncoming traffic.

You could try taking the grill off and cleaning the cover on both sides under the nissan badge. It could be that dirty that its blocking the radar or it thinks something is there. Or check the plug. Is it always 3.5min or is it more randam?

Has anyone got a spare DVD rom for MOUTH :whistling:

Iains got one....so does Andy.

You could try taking the grill off and cleaning the cover on both sides under the nissan badge. It could be that dirty that its blocking the radar or it thinks something is there. Or check the plug. Is it always 3.5min or is it more randam?

Has anyone got a spare DVD rom for MOUTH :whistling:

Always @ around 3mins........ Will try the radar clean though

Edited by MOUTH
  • 2 weeks later...

I had this problem on my factory cruise car and it disappeared when I cleaned the grille and front of the radar sensor. The only fault it has now is not going above 110 but apparently that's not a fault....:glare:

The only fault it has now is not going above 110 but apparently that's not a fault....:glare:

Is that an indicated 110 or a real 110? Either way it sucks on the highway. I have one which won't allow more than 240, supposedly. How will I know if the car is limited anyway..lol.

I had this problem on my factory cruise car and it disappeared when I cleaned the grille and front of the radar sensor. The only fault it has now is not going above 110 but apparently that's not a fault....:glare:

Cleaned the grill and sensor and hey presto it works again.......thanks heaps

Yeah 110kmh sucks but eventually I'll get larger rolling diameter wheels and tires to make it actually 110kmh or higher

Edited by MOUTH

Cleaned the grill and sensor and hey presto it works again.......thanks heaps

Yeah 110kmh sucks but eventually I'll get larger rolling diameter wheels and tires to make it actually 110kmh or higher

didnt fix it actually it stuffed up again tonight ....pinch.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...