Jump to content
SAU Community

Recommended Posts

James, Ash and Andrew hope you planned a couple of rest stops along the way, as shivam and myself went for a test run yesterday and he experienced major brake fade just after the down hill sections.  Jumped out of the car to see the front calipers SMOKING ;).

Remember we are on a cruise... not a race-track. So we wont be doing heaps of high speed braking like i bet you guys were doing ;)

I didnt get any fade on our drive... and i've got undersized disks and worn pads on my car.

We wont be going fast enough to possibly have anyone with brake fade.

Unless thier car's brakes are shot, then that's the owners problem.

we already have a resident R31 to poke poke fun at. Actually, its moreso the driver that we poke fun at than the car.

I believe Ash's R31 coupe

Hmm... I'm taking this as yet another punt at me :P

And yeah, the take the usual p(ss outta me... but not the car as everyone knows it's a rocket :D

Dunno if my car will be coming yet, dropped it off at centreline this morning so we'll see how it goes.

Either way i'll be there somehow!

  • Replies 205
  • Created
  • Last Reply

Top Posters In This Topic

Evil, can u bring CHOBITS PLEEEEEEEEEEEEEEEEEEEEEEEZE... I lub u long time, n all those who ordered CB's can pick em up on the day. I'll take the liberty of takin em out of their packaging n charging them up soyou guys can use em on the day.

ok sweet shan :) and i will have money and a nice nipple rub ready

also

anyone wanna bring stuff and chuck in the back of the 4wd can do so, depending on size and if they dont mind it getting battered around etc

anyone bringing a bbq? whats goin on for food?

Funky - its not 270 x 2. The cruise is kinda one big circle. So the whole cruise (well from Major Petrol station to Major petrol station) is 270 and they both just out of the CBD. We don't do any doubling back the way we came from on this cruise.

For those wanting to pre-meet out the front of Evolution R meet there at say 8:45am. This will be only a short quick meet-up and then we'll cruise to megamart.

sounds good! i will be meeting at the megamart... keep an eye out for a green soarer that looks like a moo cow thanks to that fantastic fibreglass patching up of the front hehe.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...