Jump to content
SAU Community

Bathurst (Mt. Panorama) Via Jenolan Caves Supa Cruise- Sun, Nov 20Th!


Recommended Posts

Hello everyone, i am organising a cruise that has some terrific scenery and fantastic roads, i have done this drive a couple of times & absolutely loved it out to the famous Mt. Panorama... hope to see you there, the details are as follows:

DATE: Sunday, Nov 20th

TIME: From 9:30AM

MEET WHERE: Penrith KK's Carpark (between Outback Steak House & KK's, behind Macca's near Penrith Panthers) on Molgoa Rd.

LEAVING: 10:30AM SHARP

DESTINATION:

1. Oberon

2. Mt. Panorama

Our first stop will be Caltex @ Mt. Victoria, for anyone who needs fuel. The next stop, via Jenolan Caves, is at Oberon for a 35minute fuel & lunch break... we'll then head to our final destination which is the BIG park up the top of Mt. Panorama, we can organise from there to do afew laps of mt Panorama, we can organise from there to do afew laps of mt Panorama- within reason- but please be mindful to do the speed limit as the Police presence on the track is quite strong and they are not very lenient... they hide all the time around the track!

Cruise Route:

1. Right onto Molgoa Rd.

2. Right onto the M4/Great Western Highway onto and following through the Blue Mountains

3. Once you go down the other side of the Blue Mountains @ Mt. Victoria, the first speed cameras you see... take the 1st LEFT afterward and you follow that road (Sign for Oberon), it will lead you to Jenolan Caves.

4. The rest is hard to explain, you'll need to keep up...

Google Maps Cruise Route from Penrith Krispy Kreme's to Blackheath in the Blue Mountains:

Penrith Kk's to Blackheath!!

Here's the cruise route from Blackheath in the Blue Mountains, through Jenolan Caves --> Bathurst:

Blackheath to Mt. Panorama!

REMINDERS:

* PLEASE FILL UP A FULL TANK BEFORE THE CRUISE AS WE WONT BE STOPPING!!!!!

HOPE TO SEE EVERYONE THERE :action-smiley-069::banana:

:( organise an awesome cruise and my car has no engine this sucks!!!

Get one....

My car also has no engine currently.

Hope to have that sorted this weekend.

Don't know if i will or not though.

If I do, should be in for this.

Run in the new engine....

Get one....

My car also has no engine currently.

Hope to have that sorted this weekend.

Don't know if i will or not though.

If I do, should be in for this.

Run in the new engine....

About to start building it so will be three weeks away :(

About to start building it so will be three weeks away :(

I know how you feel, still havn't got mine back yet, been nearly a month.

I should have a spare seat in the back if i get it all back and together this week....

You'll just have to meet me at the meet point.

1st stop is Caltex @ Mt. Vicotria to fuel up for anyone who needs to. We will only be driving through Jenolan Caves, and will be stopping to refuel and for lunch in Oberon. This is due to the price of Food @ Jenolan Caves, lack of parking and to eliminate anyone holding up the cruise with doing their own thing- if that makes sense.

Edited by LU57IN

I wasn't able to come along, but was at Panthers getting coffee from the Maccas about the meeting time, didn't see any cars :( anyone have some pics from the cruise they would like to post up?

Got afew photo's from yesterday, here's the link to the album: Mt. Panorama Cruise- Photo Album!!

Thanx to those of you who came out for the meet or the cruise itself, much appreciated :thumbsup:



  • Latest Posts

    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
    • hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...