Spc Performance Rear Camber/toe Bolts

[slippylotion]

Have you found actual M35 cambers arms now?

[bigkevracer]

Apparently. The toe arms don't fit but the guy I bought them off says he has the camber arms on his. Have to send the toe arms back first. Wait and see.

[slippylotion]

Just keep the SPC bolts in mind. With my ride height at 350mm F and R the rear camber is now at -1.25deg with more adjustment left. I would assume a lot cheaper than a set of arms and no rose joints.

[Jetwreck]

part number for the Super Pro stuff

http://www.superpro....art?id=SPF2849K

PS: Unless your local has them I don't think there are any in the country atm! I used all the stock and the next order! I have been waiting for the next shipment for about 4 weeks now.

Edited January 8, 2012 by Jetwreck

[bigkevracer]

Pretty sure this is what I was looking at, it was one of the control arm bushings I needed to replace: http://www.superpro.com.au/find-superpro-parts-for-my-vehicle/part?id=SPF3297K

[slippylotion]

I fitted those front upper arm bushes a few weeks ago. Got my front camber from -2deg to -1.25deg, so Im happy with the results. Nice and easy to fit also.

[Commsman]

White line do some similar that are cheaper but theyre not eccentric.

Whiteline have these eccentric ones (http://www.whiteline.com.au/product_detail4.php?part_number=KCA331&sans_vehicle=1) for heaps of Nissan models. Wrong ones??

[bigkevracer]

Those are for the radius rod by the looks of it, and i need them for the lower control arm.

[slippylotion]

Yep wrong bushes. The M35 has a similar castor rod set up as Aristo/Soarer and Chaser, being that the castor rod is behind the wheel not in front like the Skyline and S chassis Nissans.

[slippylotion]

This is what your after for the front lower control arms

http://www.superpro.com.au/find-superpro-parts-for-my-vehicle/part?id=SPF3298K

[bigkevracer]

Those aren't the eccentric ones Paul. I'm pretty sold on the eccentric ones so I can get a bit more caster.

[slippylotion]

But you can't adjust castor via the control arm be them upper or lower, only the castor rod does that.

[slippylotion]

This is the M35 castor rod. http://www.japaneseimportspares.com.au/itemdetails/28594

You would use the bush that Craig linked that is offset to gain more castor.

[impul535w]

What are people doing to solve the camber issue in the rear?

[bigkevracer]

Umm... The bolts mentioned at the start of the thread?

I've got camber arms coming though.

[impul535w]

But (and correct me if im wrong) is there not already offset bolts in the rear arms of the M35?

[slippylotion]

There is offset bolts from factory but the SPC bolts I did the GB on give another 1-1.5 deg adjustment and cheaper than a/market arms. A/market arms usually also add rose joint ends to them adding a bit of NVH. The only rear M35 a/market camber arms I have found are a Jap unit the cut and shut the factory arm to give adjustment with a rose joint end, these from memory are around $600-700 delivered!!! I haven't found another a/market camber arm as yet as the M35 camber arm is different to the V35. All other rear arms seem to interchange with the V35, just not the camber arm.

[impul535w]

There is offset bolts from factory but the SPC bolts I did the GB on give another 1-1.5 deg adjustment and cheaper than a/market arms. A/market arms usually also add rose joint ends to them adding a bit of NVH. The only rear M35 a/market camber arms I have found are a Jap unit the cut and shut the factory arm to give adjustment with a rose joint end, these from memory are around $600-700 delivered!!! I haven't found another a/market camber arm as yet as the M35 camber arm is different to the V35. All other rear arms seem to interchange with the V35, just not the camber arm.

I thought that the cam bolts were in the lower arm (the one with the spring cradle) not the caster rod?

[slippylotion]

They are. The castor rod is at the front of the car.

The arm in the rear that seats the spring is the toe arm and the lower arm that the shocker mounts to is the camber arm. These both have offset bolts for adjustment but it's limited.

The other arms are the upper control arm and traction rod.

[impul535w]

Thanks bud, cleared that right up.

Have you got another group buy coming up for these or were they a one shot deal?