Jump to content
SAU Community

Recommended Posts

Hi all, picked up our 01 m35 last weekend.While we love the car for its size(have kids) and looks, have had a few issues stopping me from seeing what the car is really like(if you know what i mean).

Firstly the exhaust had a blockage and a leak so had the 4 tonne boat anchor taken out and replaced. But the turbo would appear to be having issues,it whistles quite loudly(i am comparing this to my subaru i just got out of)but also sounds like it has a slight leak.My mechanic checked it out and it has no leaks so this week he is going to check the turbo,seems to think that the compressor is rubbing on the housing (i think thats what he said lol) has anyone had to deal with this before any help would be appreciated.

Anyway great forum with heaps of info

this is her, i will give it a good clean and polish this weekend

P1020214.jpg

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/
Share on other sites

Mine is the same with the whistle. I was told it was a sign the turbo was out of balance, but all of them seem to be like that.

I think it's just inevitable that you'll have to replace the turbo, but the whistle isn't automatically the sign.

Oh and exhaust out is great, just make sure you do the dump pipe too! There are a few options now depending where you are. Scotty on here does them, and AM Performance in Adelaide do them. These seem to be the proven options.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107958
Share on other sites

Congrats on the new purchase, looks good.:thumbsup:

The turbo on these is quite noisy anyway, so you may not necesssarily have an issue, but it might be worth getting your mechanic to check out the oil feed banjo bolt to the turbo, while he's poking around; to check for blockage. If you've freed up a blocked exhaust; you're probably getting proper boost now, hence the extra noise.

My turbo has been noisy since I bought it, and 45000km later still going strong; not any noisier, but I did pull the banjo out and drill it to 2mm.

Best of luck, and enjoy the new toy.

Cheers, Dale

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107986
Share on other sites

I have a stock turbo here thats nearly silent so the noise could be either the front wheel rubbing (turbo is flogged) or usually its the rear bearing on its way out (like Dale said, drill the banjo restrictor out) Dont stress, it could last years like that if it has a good oil supply.

Changeing the T3 manifold gasket with a new oem one could be a good idea too, its a pain to get in to though.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6108149
Share on other sites

These all have a loud whistle, mine does and i have test driven loads of them with all the same load whistle, a turbo upgrade would be the way to go if you need it but these ones run fine on factory 14psi. I ripped out my factory exhust and replaced with 3'' big bore but had change the rear muff as it was just too loud for us on long trips.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109118
Share on other sites

As I have stated before, this is probably the main reason for the original Japanese owners got rid of their cars at auction. The repair bill for a replacement turbo fitted from nissan would cost more than the car is worth over there.

My turbo had a fairly loud whistle when I got it. I highflowed that one before it blew but the stock one I have here is nearly silent. After dissasembly all I could find wrong with my original was the rear bearing was contaminated with dirty burnt oil and exhaust particles. All you can do in this case is increase the oil supply and hope it doesn't fail soon.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109155
Share on other sites

Well I will pick it up from the mechanics soon an apparently the turbo is perfect and everything seems fine so I just have a noisy turbo. Just not used to it being loud after having the quiet turbo in the Subaru.So it now needs a service for new plugs and an injector clean so I'm of to a great start with the car but at least there is nothing major stuffed on it fingers crossed

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112319
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112643
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

I'd also be looking at the O2 sensor.:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112885
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...