Jump to content
SAU Community

Recommended Posts

Hi all, picked up our 01 m35 last weekend.While we love the car for its size(have kids) and looks, have had a few issues stopping me from seeing what the car is really like(if you know what i mean).

Firstly the exhaust had a blockage and a leak so had the 4 tonne boat anchor taken out and replaced. But the turbo would appear to be having issues,it whistles quite loudly(i am comparing this to my subaru i just got out of)but also sounds like it has a slight leak.My mechanic checked it out and it has no leaks so this week he is going to check the turbo,seems to think that the compressor is rubbing on the housing (i think thats what he said lol) has anyone had to deal with this before any help would be appreciated.

Anyway great forum with heaps of info

this is her, i will give it a good clean and polish this weekend

P1020214.jpg

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/
Share on other sites

Mine is the same with the whistle. I was told it was a sign the turbo was out of balance, but all of them seem to be like that.

I think it's just inevitable that you'll have to replace the turbo, but the whistle isn't automatically the sign.

Oh and exhaust out is great, just make sure you do the dump pipe too! There are a few options now depending where you are. Scotty on here does them, and AM Performance in Adelaide do them. These seem to be the proven options.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107958
Share on other sites

Congrats on the new purchase, looks good.:thumbsup:

The turbo on these is quite noisy anyway, so you may not necesssarily have an issue, but it might be worth getting your mechanic to check out the oil feed banjo bolt to the turbo, while he's poking around; to check for blockage. If you've freed up a blocked exhaust; you're probably getting proper boost now, hence the extra noise.

My turbo has been noisy since I bought it, and 45000km later still going strong; not any noisier, but I did pull the banjo out and drill it to 2mm.

Best of luck, and enjoy the new toy.

Cheers, Dale

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107986
Share on other sites

I have a stock turbo here thats nearly silent so the noise could be either the front wheel rubbing (turbo is flogged) or usually its the rear bearing on its way out (like Dale said, drill the banjo restrictor out) Dont stress, it could last years like that if it has a good oil supply.

Changeing the T3 manifold gasket with a new oem one could be a good idea too, its a pain to get in to though.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6108149
Share on other sites

These all have a loud whistle, mine does and i have test driven loads of them with all the same load whistle, a turbo upgrade would be the way to go if you need it but these ones run fine on factory 14psi. I ripped out my factory exhust and replaced with 3'' big bore but had change the rear muff as it was just too loud for us on long trips.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109118
Share on other sites

As I have stated before, this is probably the main reason for the original Japanese owners got rid of their cars at auction. The repair bill for a replacement turbo fitted from nissan would cost more than the car is worth over there.

My turbo had a fairly loud whistle when I got it. I highflowed that one before it blew but the stock one I have here is nearly silent. After dissasembly all I could find wrong with my original was the rear bearing was contaminated with dirty burnt oil and exhaust particles. All you can do in this case is increase the oil supply and hope it doesn't fail soon.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109155
Share on other sites

Well I will pick it up from the mechanics soon an apparently the turbo is perfect and everything seems fine so I just have a noisy turbo. Just not used to it being loud after having the quiet turbo in the Subaru.So it now needs a service for new plugs and an injector clean so I'm of to a great start with the car but at least there is nothing major stuffed on it fingers crossed

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112319
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112643
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

I'd also be looking at the O2 sensor.:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112885
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...