Jump to content
SAU Community

Recommended Posts

if anyone knows in Australia whether we can mate an N1 rb26 block with an rb25det head because i just spent loadsa money on the head by now already.

if you know what i mean. and since a new block is like a new supercar engine and when its from nismo its serious issue! not wanting rb30 not 2.8 just this because its new...

Link to comment
https://www.sau.com.au/forums/topic/384087-rb25head-rb26block/
Share on other sites

I know the headbolts/studs are bigger on the 26 (edited typo, thanks elite) so u would need to enlarge the holes in the head. And the vtc hole would need to be welded up in the head too. should be similar to building a 30/25 from what i can tell.

I think you meant to say the 26 head bolts/studs?

But yes, direct bolt up using an RB26 head gasket as long as you knock a 6mm blocker into the VCT oil gallery at the front of the head or weld it up and have the head refaced

Not really needing an unprofessional reply mates hand me over some proffesional advice like this weld you are talking abouti the vtc hole. Ya know the engine is gonna have to deal with serious heat in the summer especially because i am located in saudi arabia hot weather 50 degrees celcius in day time! Dont wanna destroy the engine or open it up every month like a cpu

Older block is not what i deserve...too old rusty block even if i give it toturnery and gonfor shot peening or sand blasting i dont think it will be superb...howabout dropping a supercar engine down there?

what have you done to this head exactly? are you sure its better then a 26 head? might be worth your while selling it and starting it again.

if you plan on sitting on the rev limiter and getting your "nagga" out for 1 minute at a time in 50deg heat you will need to open the engine after doing it the first time. You just cannot treat a RB engine like a 2j. they were built for performance not abuse.

if not send the engine to Abu Dhabi, I can put the 25 head on the 26 block for you.

what have you done to this head exactly? are you sure its better then a 26 head? might be worth your while selling it and starting it again.

if you plan on sitting on the rev limiter and getting your "nagga" out for 1 minute at a time in 50deg heat you will need to open the engine after doing it the first time. You just cannot treat a RB engine like a 2j. they were built for performance not abuse.

if not send the engine to Abu Dhabi, I can put the 25 head on the 26 block for you.

Totally willing to do that mate. But i am buying an n1 block...i want you to mix it it my head ya akhi....so n1 block rb26 with my rb25 head...i know it happens only in abu dhabi...as long as i become a certified engine expert after i finish my mba..

call me if you want to send the engine to Abu Dhabi, i can mod the head for you and get it ready if you like. It is totally possible to put the 25 head on the N1 block its just no one really ever does it because the 26 head is a better base to start from.

+971558452254

Cheers

Older block is not what i deserve...too old rusty block even if i give it toturnery and gonfor shot peening or sand blasting i dont think it will be superb...howabout dropping a supercar engine down there?

:ermm: what?

First of all, the n1 block is in the inventory from nismo japan. But it is for an rb26. Second it is a new block, ever even sat in a brand new sports car you? Ever seen how a new soprtscar can rev smoothly at stock horsepower? Is available in bulk but i dont wanna give it away so the inventory may last till i finally have collected the funds..you can find it yourself but dont say it here..and what the hell you two on about rusty tongue this and rusty tongue that...shit ! Get a life, man i aint no arab. Freakshows! I am an expat like that aussie in abu dhabi up there....oops about spelling mistakes, i type real crappy coz i just bought this ipad and never used touch screen keyboard in my life ever before..

If you get a block honed to a fresh surface wouldn't that be like a new block? Why also would a new motor have 0 km cos it's a brand new engine that's why. The 30 block with a 25 head will smash the 26 block with tourqe and power

BMW used to leave their 1500hp 1.5L F1 blocks out the back of the factory to rust away for a while before they machined them, apparently it helps take the stresses out from the casting process. I also heard they would take a piss on them any chance they got. :whistling:

I agree, 3L block is the go, rusty or not. Find an old Patrol engine in the desert somewhere and send it to Guilt-Toy. :thumbsup:

BMW used to leave their 1500hp 1.5L F1 blocks out the back of the factory to rust away for a while before they machined them, apparently it helps take the stresses out from the casting process. I also heard they would take a piss on them any chance they got. :whistling:

I agree, 3L block is the go, rusty or not. Find an old Patrol engine in the desert somewhere and send it to Guilt-Toy. :thumbsup:

the BMW blocks were production blocks that had a minimum 100000 miles on them, would find them in wrecking yards throw the standard head in the bin and fit the F1 head/crank/rods/pistons etc

ever even sat in a brand new sports car you? Ever seen how a new soprtscar can rev smoothly at stock horsepower? Is available in bulk but i dont wanna give it away so the inventory may last till i finally have collected the funds..you can find it yourself but dont say it here..and what the hell you two on about rusty tongue this and rusty tongue that...shit ! Get a life, man i aint no arab. Freakshows! I am an expat like that aussie in abu dhabi up there....oops about spelling mistakes, i type real crappy coz i just bought this ipad and never used touch screen keyboard in my life ever before..

it may be that you 'Aint no arab' but you do sound like a complete twat whoever you are. 'even sat in a brand new sports car' don't even know what to say to this except that it is the most moronic question I have ever been asked on SAU. Good luck with your n1 block which will magically turn your car into a brand new sports car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...