Jump to content
SAU Community

Recommended Posts

Hey guys i have just bought a 1993 R33 skyline. It has around 180rwkw it has the following mods. Turbo back exhaust, front mount intercooler, POD filter, boost controller at 9 pound boost. Im after 250rwkw or somewhere in the 12second bracket what do i need to do to get there? It currently runs depending on driver high 13's low 14's.

Thanks guys !!!

Link to comment
https://www.sau.com.au/forums/topic/384309-r33/
Share on other sites

You need:

Upgraded turbo ($1000 to $5000)

Upgraded injectors ($500 to $1200)

Z32 AFM ($250 to $350)

Fuel pump ($200 to $600)

ECU ($1000 to $3000)

The above price ranges reflect the range between used or highflowed items and new and custom items.

Suggestion:

Hypergear highflow (tell him you want 250kw and to use the stock housings)

Used injectors (S15 440 or Nismo 550-740)

Walbro or Bosch 040 fuel pump ($200 new)

Adaptronic ECU and tune (about $1600? Hypergear can supply this for a good price with your turbo and you wont need an AFM)

Thread closed, if you need to ask questions about the above - search.

Link to comment
https://www.sau.com.au/forums/topic/384309-r33/#findComment-6131113
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...