Jump to content
SAU Community

Recommended Posts

Yep. On the way back 93 in a 90 zone. Lol. $153 all good

Geez I thought that you were allowed a certain allowance to go higher. something on the lines of +5kmph? Thats very harsh mate.

Not even 5%. Their margin of error puts me between 91-95 in the 90 zone. , didn't consciously speed there or back.3 ks an hour at 90 can easily be a wheel/ speedo slightly out combo . Ah well,better there than here. Fine would be alot more

Not even 5%. Their margin of error puts me between 91-95 in the 90 zone. , didn't consciously speed there or back.3 ks an hour at 90 can easily be a wheel/ speedo slightly out combo . Ah well,better there than here. Fine would be alot more

yeah I think the 5% rule may only apply here.........looks like VIC are anal with the 3km over deal :/

shitty rules in Vic. got fined TWICE! On the way there and on the way back. was going bout 95 at 90 speed limit

Sorry mate, but getting done twice just shows you didn't learn your lesson the first time.

And I don't know what people are on about with this 3% or 5% margin, THERE IS ZERO TOLERANCE in Vic. FFS, how many times can I say it? I have rellies over there have been done for 61 and 62 in a 60 zone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...