Jump to content
SAU Community

Stock R33 System


IOWNU
 Share

Recommended Posts

hi All,

I was just wondering what sort of system a stock r33 has.....i dont know if mine is stock or not...the face doesnt look stock.....its a Kenwood System....a button opens the face of the player and reveals the casette player.....

i dont know....but it sounds pretty louds for a standard system.....also i was wondering is there anyway u can convert the jap system to eng system.....or whether u can get FM radio higher than .....90 i think

Thanks

Link to comment
Share on other sites

i think you can get the band expanded. Well it was done to mine before i brought it.

I cant remember the brand of mine but it wasn't kenwood thats for sure. I doubt that is the stock headset.

Link to comment
Share on other sites

The standard system is a double din setup and is OK, but you need a frequency modulator to get higher than 90 fm. Bloody hard to fit as you need to plug it into the aerial and connect it to power. Easy for the proffessionals, but not for me.

Link to comment
Share on other sites

Not all stock systems are Double Din, mine is only one slot (S1). Sounds pretty sh*thouse but. Speakers crackle at the slightest bass... I am used to a decent stereo though, so i can't really judge it.

To get >90Mhz you have to get a frequency modulator as said.... Try Jaycar, but they are $40+ so i'm just going to save for a new head unit.

Link to comment
Share on other sites

The R33 comes with a whole stack of different face units and speakers across the years, I guess what was available cheaply to nissan at the time. There is no definitive "stock system" on it really.

do a search for "stock system" and it will turn up plenty of interesting setups and brands.

Link to comment
Share on other sites

Yea my Kenwood CD/MD player is from japan. YOu just have to install a frequency expander. For example my Fox FM is 81.9 Nova is 81.3 and so on. Lol i was suprised when i got my car because it came with big JBL speakers in the doors and Nice Kenwood rears (which u cant get in australia).

Link to comment
Share on other sites

  • 2 weeks later...

Has anyone fitted a frequency modulator? If so, where did you put it as I have been told by the importer to attach it near the aerial on the rear left of the boot! That area is soooo hard to access and you need tiny hands to get in there. Also, if I attach it close to the head unit, which power wire is the better option? Thanks for any help.

Link to comment
Share on other sites

open the carpet with the lil plastic bits.

there are two 'boxes' one is for the power? and the other is to retract the aerial.

undo the bolts on the inside of the trunk, and both shud come out easily.

undo the wiring and the pipe(pipe is connected to aerial retractor, for oil and water

drainage). there's ur aerial and other bit

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...