Jump to content
SAU Community

Recommended Posts

lots of stuff i dont need anymore...

GCG 3071r BB hiflow with lines ,3 inch jjr style front pipe, custom 3 inch metal intake.....1000$

R33 PFC with tune by Trent (STATUS) from chequered tuning for above turbo,

also datalogit and dell 630 latitude laptop with datalogit software installed.. 1000$

all in working but dont expect miracles of the laptop..pretty sure the graphics is shot but if you leave it on XP basic it works fine..also internt ports and wireless switch are stuffed might work with a dongle,dunno, I just used it for the PFC cause it has a serial port and it works fine...:D

DSC03249.jpg

original z32 afm...150$

buy the lot and I will do a package deal, maybe can even include the sard 650 injectors (cleaned and tested) in which case you have evrything to boltup and drive out with 230+kw....Though stock injectors will probably do for that power the tune i have is for the 650s..

Perfect setup for the budget cooker :thumbsup:

R32 stock rims with RE-01 bridgestone potenza semis at least 80% tread, rims in VGC.. 300$

DSC03260.jpg

RANDOM JUNK>>>>

HKS 38mm wastegate old school...bolts on to HKS low mount manifold 100$ make an offer

radiator..r33 50$

full air con system.condensor radiator fan the lot..150$

r33 headlight silver..crackedmount.. 20$

Series 1 bumper with reo silver 50$

dump with screamer pipe for stock turbo..50$

r33 rh mirror dark grey 30$

Link to comment
https://www.sau.com.au/forums/topic/384525-complete-setup-make-230rwkw/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...