Jump to content
SAU Community

Recommended Posts

Nope. But your answer is very random, like you just rolled a dice and it said 'timing'.

You're going I need to fault find and give us more information if you even want a slight guess from anyone here.

You didn't even have the decency to list any mods.

Is he running a t88, rb34 stroker, NOS and twin rear mounted secondary turbos?

Edited by The Mafia
Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137116
Share on other sites

Will do, bsa. Mafia if he had all them mods dont u think i would have told him to get the service done were all the other work was done? Its a stocker with a front mount cooler and full exhaust, happy trolling?

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137121
Share on other sites

Pull the plugs out re gap to .8 or .9 is he running stock boost? Also check all loom plugs are connected properly. If that still don't work check piping for rags most unlikely but never trust some one unless you know they are capable on rb engines they can be sensitive

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137128
Share on other sites

did your mate change ignition coils as a part of his 100kkm service? R34 RB25 Neo coils are known to start dying at just about this milage. And they don't usually cease working completely, they may work okay under very light loads, at idle etc, but start causing missfires under heavier loads, i.e. on boost. It usually feels like soft rev limiter has been hit, it also sounds funny. And vibrates.

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137181
Share on other sites

Even the small mods youve listed can cause issues. Plus, you haven't said why the car was at the mechanical shop, and what the intentions where of the mehanic.

Keep calling me a troll, I'll start calling you an uninformative dickead with an attitude, that expects us to look into a crystal ball and just magically come up with an answer, with very little to almost no information.

When you post an issue on skylines Australia, you post your mods, and the most obvious thing - what was changed before and after the issue.

We can't just guess.

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137183
Share on other sites

Troll, well ye that seems something to look at legion ill let him know, mafia honestly its hard enough trying to get simple answers but u take it to the next level people are hesitating to ask questions coz assholes like u embaress them im not really switched on about this topic hence my questions no need to scream out loud that im uninformed ur an asshole full stop troll

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137397
Share on other sites

Troll, well ye that seems something to look at legion ill let him know, mafia honestly its hard enough trying to get simple answers but u take it to the next level people are hesitating to ask questions coz assholes like u embaress them im not really switched on about this topic hence my questions no need to scream out loud that im uninformed ur an asshole full stop troll

lol you can forget about getting help on this forum with that attitude

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137495
Share on other sites

My second post was perfectly valid. Wasn't smart, I was just making a simple point.

But you want to be an uninformative dickhead and blame your ignorance and arrogance someone else - me.

I wasn't trolling, as I said I was making a point. We need to know what has been done to the car, who, how, when, why, etc or we are just wasting our time guessing.

Anyway I say it again, you're an arrogant uninformative dickhead and gave us scraps to work with and then proceeded to call me a troll when I pointed out your lack of info.

Wanker - eat a dick, and go to ns.com

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137778
Share on other sites

My second post was perfectly valid. Wasn't smart, I was just making a simple point.

But you want to be an uninformative dickhead and blame your ignorance and arrogance someone else - me.

I wasn't trolling, as I said I was making a point. We need to know what has been done to the car, who, how, when, why, etc or we are just wasting our time guessing.

Anyway I say it again, you're an arrogant uninformative dickhead and gave us scraps to work with and then proceeded to call me a troll when I pointed out your lack of info.

Wanker - eat a dick, and go to ns.com

no worse then this forum mate lol

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6138065
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...