Jump to content
SAU Community

Recommended Posts

For those who may find this interesting, here is a copy of a post I made in the Skyline Specific section covering ADM's.

Hi Guys,

Here are a few more direct comparisons. I was at Sydney Dragway today and a mate of mine with an ADM parked next to my JDM. I was going to do this comparison with my ADM but having his car there I thought I'd post up a pic or two.

As previously posted, you can see the rear tail light configuration is different.

The ADM gets vinyl sun visors as opposed to the JDM which gets velour covered ones.

Skyline badge on the bonnet vs Nissan badge.

The ADM gets factory fitted 300ZX side blinkers, JDM gets generic Bosch or Mitsubishi blinkers.

ADM gets High/Low dimmer switch, JDM gets fog light switch.

As also stated before, ADM gets Blaupunct/Bosch Auto Flex centre roof aerial.

There are many more changes that I'll document one I guess a chance.

Cheers,

Bob.

post-78207-0-93082400-1335686345_thumb.jpg

post-78207-0-03306700-1335686353_thumb.jpg

post-78207-0-72739800-1335686359_thumb.jpg

post-78207-0-80143500-1335686365_thumb.jpg

post-78207-0-92609200-1335686371_thumb.jpg

post-78207-0-81565100-1335686378_thumb.jpg

post-78207-0-90683300-1335686385_thumb.jpg

post-78207-0-22581600-1335686392_thumb.jpg

post-78207-0-48312200-1335686402_thumb.jpg

post-78207-0-81651500-1335686408_thumb.jpg

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...

Hi Guys,

Just thought I'd post a bit of an update with some pics.......

The trim and bodywork is pretty much completed all bar a bit of touch up stuff.

I'd say we are 95% of the way there but there are always things that could be improved.

Cheers,

Bob.

post-78207-0-49304300-1337491185_thumb.jpg

post-78207-0-51028700-1337491192_thumb.jpg

post-78207-0-20948100-1337491243_thumb.jpg

post-78207-0-57800600-1337491249_thumb.jpg

post-78207-0-16295500-1337491256_thumb.jpg

post-78207-0-28881000-1337491263_thumb.jpg

post-78207-0-10806400-1337491270_thumb.jpg

post-78207-0-75345700-1337491343_thumb.jpg

post-78207-0-93755000-1337491350_thumb.jpg

post-78207-0-29811000-1337491358_thumb.jpg

post-78207-0-53502000-1337491441_thumb.jpg

post-78207-0-20049300-1337491448_thumb.jpg

post-78207-0-44237300-1337491455_thumb.jpg

post-78207-0-29365500-1337491462_thumb.jpg

post-78207-0-54265900-1337491468_thumb.jpg

post-78207-0-87802100-1337491474_thumb.jpg

  • 2 weeks later...

Ey mate I know your after a 32 but just to let you know there is a stock midnight purple r33 v-spec listed yesterday for $16,300. I recognized it and remembered it was listed not so long ago for $19000 in Newcastle. Which I messaged him and confirmed. So it's a bargain but just be cautious.. Too soon to be reselling but definately worth a look!!! Cheap cheap.

Looks very clean in those pics inside & outside, shame on the bubble in the dash other than that it looks very neat & tidy.

You've done a great job.

LOL........ Replacement NON BUBBLE dash going in tomorrow afternoon.........

Bob. :yes: :yes: :yes:

LOL........ Replacement NON BUBBLE dash going in tomorrow afternoon.........

Bob. :yes: :yes: :yes:

http://www.skylinesaustralia.com/forums/topic/401608-replacement-dash-fitted-today/

I guess you've just about achieved what you wanted with this car, great job Bob.

Nearly........

I'm just looking at a few fabric dying options as the front seats are still not quite in a condition that I want and then a decent security system and THAT'S IT!

Went and saw Daniel at Carbon Car Systems at Blacktown on Saturday and settled on a premium Viper system.

June 30 was always going to be my deadline........ I must admit I'm so sick of forking out money every month restoring this poor thing. The budget is blown and what I've done in 4 months most people would do in 2 years so it is rather stressful.........

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...