Jump to content
SAU Community

Recommended Posts

Hey guys,

BSA (BSA customs) and I (DVS Tuning) have just built a half cage for my R32 gtst drifter, its basically a minimum spec cage with an extra cross bar and we may add a harness bar tomorrow.

Took a few pics along the way and we will start to fabricate these for customer's.

The cage in my drifter is a weld in but we will be building them to suit bolt in aswell.

f6cac9de.jpg

feb8a6d0.jpg

62f8e6bb.jpg

7b4cfc01.jpg

Link to comment
https://www.sau.com.au/forums/topic/384969-roll-cage-fabrication-thread/
Share on other sites

looks like a fair bit of time involved there? I just got a bolt in cage full with cams paperwork for my R-32 for around $900 from Brown Davis Automotive in Bayswater Victoria. Has been absolutely great, got some pics if anyone is interested? Would definitely deal with them again!

Duncan - yes we built it as per CAMS 2011 manual. I dont have plans for log booking, This car is just a drifter built from all my left overs from my GTR, so all the stock gtr brakes, diff etc. The cage is required for passengers.

Gtrxtc- didnt take very long really. We are planning for a fast turnaround- for other cars we do.

We think its possible to build a half cage in a weekend. Worst case 1 week turnaround. Possibly even a full cage depending on the design.

Can u please post up some pics of ur cage.

Only using seamless pipe as per specs.

The wolf- we can give u a quote if ur interested :) sure u will be happy with the price

I think it's very possible to do a half cage on the weekend a bolt in cage would take a bit longer I'm guessing but both me and and jez are very cabable of fabricating the cages. Some pics of other cage designs would be great.

To be honest I work down at brown davis so im pretty much an advocate for their product and they have always served me well. Its basically a half cage with a diagonal bar and harness mounts, fully CAMS certified. We are trying to broaden the market at the moment and really get this product out there. Brown Davis have proven over decades of manufacturing roll over protection for some of the worlds largest mining and 4WD companies, that their product is world class. Basically now we are just trying to show that to the motorsport world in Australia and in doing so we are providing very discounted prices for our Skyline roll cages. I can guarantee that the cage will not disappoint. If anyone is interested and wants further info on sales, please feel free to contact us via email at [email protected]

Your Vic where in nsw looks like you have a good thing going down there simular to what me and jez are getting into. I personally guarantee quality of all product produced. Iv been in the fabrication game for 9 years contact either me (BSA customs) 0449 831 518 or jez (DVS tuning and mechanical) 0414 879 711 for quotes on our products

Brown Davis has been manufacturing roll cages for more than 30 years and shipping the product both internationally and Australia wide with a high level of customer satisfaction. One thing we do offer for people such as yourself welding their own cages are pre-bent tube kits for a very wide variety of vehicles that can be installed and welded once received. If anyone is interested or has any particular enquiries please feel free to call on 03 9762 8722.

I will put some photos of our work up in the next half hour.

Thanks a lot,

Brown Davis Automotive

Edited by gtrxtc

I'm not trying to compete with you mate like I said your in Vic and we are in nsw. I'm more then capable of bending up my own pipe so it's not nessasery to buy yours. I don't know y you sign up to sau today then start haggling saying your products are better the chances are they are both equal quality. Do you make the cages yourself or are you a sales manager? One again I'm not trying to compete with you or anyone for that matter as people will buy off company's they trust and had experience with before.

Edited by Bsa

Sorry you took offence mate, it wasnt meant to come across as us competing with you you, we are just trying to help out by posting some of our work and hope that people are interested. In response to your question we do manufacture the whole product from scratch. Apologies once again we were just trying to help out and show our work in the hope that we might generate some interest.

Brown Davis Auto.

Rather than delete his posts...hit him up for info and advice! :thumbsup:

If you think your welding is up to it than I dare say you would be well served by buying a kit pre bent from them and welding it up.

You say seamless pipe, what grade of pipe/tube are you using? From the pics its not clear, but it looks like you are not running your rear legs to the inner guard or strut top?!?!?!

Rather than delete his posts...hit him up for info and advice! :thumbsup:

They wouldnt need to, just copy the cages from the photos Brown and Davis so kindly put up

If I could do anything apart from blow holes in stuff with a welder I would haha

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...