Jump to content
SAU Community

Recommended Posts

Hey guys, this morning took the car for a drive and about 1 min into driving my car start to sound like a rex and shaking! When I accelerate it seems to struggle and shake more. After pulling over, popped the bonnet the engine isn't shaking anymore than normal but the exhaust is shaking more at the back. Does this mean its misfiring somewhere in one of the cylinders? Btw I just got the injectors clean and tested and also replaced spark plugs. Please help its been killing me that I can't drive my baby!

Also how do you open the stock r32 gtr air intake box to replace the filter?

Cheers

Amon

Link to comment
https://www.sau.com.au/forums/topic/386656-omg-whats-happening-to-my-baby-help/
Share on other sites

Only thing I have done is new mongoose alarm but I don't think that will do anything to it. Got the injectors (standard) clean and tested and replaced spark plugs today and no mods at all only an exhaust. After changing the spark plugs still no change. Still feels like the engine is choking.

Not been running rich at all, using the same ones the NGK Laser Platinum that came out of the car. The coils should come today I hope! Got some yellow jacket coils. How do you fix the gap if there is one in the spark plugs?

Cheer guys!

Get a gap tool or a set of feeler gauges. A "gap" is not really a fault, its the process of measuring up the gap between the electrode and the ground point of the spark plug, The top of the plug has that white thing with the exposed metal which sparks between the body of the spark plug. You measure that gap. 1.1mm is the common standard size. What you do is gently tap the spark plug onto something solid, concrete or something, until the gap closes to about .8mm.

This will NOT fix your problem if you are misfiring on idle. If you misfire under boost only then yes it will. On idle, the WRX sound, means one cylinder isn't running and a coil is dead.

Edited by SargeRX8

Cheers guy for the help, I'm hoping it comes today so I can get the car back on the road. I'm not misfiring at boost so I won't worry about the gap for now. Btw does anyone know how open the stock CAI box on r32 gtr to replace the filter? I'm struggling hard to figure it out.

Thx again guys

Sounds like the module unit is shagged.....start the car then pull the connector one by one off the coils....when you find the one that doesn't make a difference to the cars already missfiring idle try swapping the coil with one from another working cylinder.....if its still no good it's the module unit

Cheers mate for that, how do i fix it? So far I have changed all my coils to yellow jacket coils and replaced my air filter and cleaned the AFM's and also replaced all the spark plugs.

After changing all that and turned the car back on, still sounds like a WRX and shakes and adding to that it seems like the engine wants to stall once in a while. What do I do now? :(

Sounds like the module unit is shagged.....start the car then pull the connector one by one off the coils....when you find the one that doesn't make a difference to the cars already missfiring idle try swapping the coil with one from another working cylinder.....if its still no good it's the module unit

There are 3 things I think it could be, one being unlikely.

1) The ignitor module has failed. This unit is what produces the voltage then sends it to the coil to the spark. It could be f**ked for a particular channel only.

2) The loom is damaged. The wires could have broken inside the clip or somewhere in the line to the coils.

3) The ECU is damaged and can't send the signal to the ignitor to create a spark for X cylinder.

All your symptoms are of a cylinder not firing. WRX on idle is a clear indication one of your cylinders is literally switched off. Fuel going in, no spark, no power, rough, etc. The reason the engine shakes is because the crank is balanced to run with 6 cylinders spinning it smoothly. You now have your car running on 5(or less) cylinders, causing the crank to spin unbalanced.

Get another ignitor from someone to test, from a known working car. If nothing, try another loom, or if you are ok with electronics check for continuity. If those bring no luck, try another ECU.

OK so far what I have done above and now plus a different ignitor. Well guess what nothing still FFS giving me a headache. Where can I find a loom or does anyone have a spare laying around.

Cheers for the info SargeRX8

There are 3 things I think it could be, one being unlikely.

1) The ignitor module has failed. This unit is what produces the voltage then sends it to the coil to the spark. It could be f**ked for a particular channel only.

2) The loom is damaged. The wires could have broken inside the clip or somewhere in the line to the coils.

3) The ECU is damaged and can't send the signal to the ignitor to create a spark for X cylinder.

All your symptoms are of a cylinder not firing. WRX on idle is a clear indication one of your cylinders is literally switched off. Fuel going in, no spark, no power, rough, etc. The reason the engine shakes is because the crank is balanced to run with 6 cylinders spinning it smoothly. You now have your car running on 5(or less) cylinders, causing the crank to spin unbalanced.

Get another ignitor from someone to test, from a known working car. If nothing, try another loom, or if you are ok with electronics check for continuity. If those bring no luck, try another ECU.

Hasn't had a compression test as i don't know how to and most of the mechanics are closed during holidays. How big is the problem if the bearings have failed and what will needed to be done if that's the case?

Cheers

Outside of probable coilpack loom issue

- Is there a mechanical reason it cant be one of the main bearings failed causing this ?

- has a compression test been done ?

Pray it's the coil pack loom

You've replaced coilpacks. ignitor, plugs and cleaned your AFM. ECU is very unlikely but it is possible.

If it's not the loom ask your local garage to do a compression test. It will give you a very clear indication if you have done a main (big end) bearing.

Your mechanic is most likely able to tell you even without a compression test.

What year model is your 32 GTR and what if any work has been done to your RB26 ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...