Jump to content
SAU Community

What Not To Do When Installing A Cold Air Intake

Silvarh

By Silvarh,
in Engines & Forced Induction

 Share

Recommended Posts

N-DAWG Mentor

N-DAWG

Posted
Posted

Already said, but a new DE Motor are as cheap as they come now. Even a DE NEO can be had for under $1k at times.

Stock air box is the best way to go on an N/A Skyline. I'm not entirely sure with the R33 without looking for a pic, but the air feed on the N/A R34's is better than most custom set ups for an N/A.

A K&N Panel in the stock box, with a cold air feed going into the box if necessary, is going to be more than ample. An N/A Skyline isn't going to surpass the capability of a K&N Panel.

  • 2 weeks later...
R34 -_- Community Regular

R34 -_-

Posted
Posted

When i removed my panel filter and installed my stainless intake pipe i noticed a bit of oil gathering inside it. + 1 for the catch can bro, but extend your piping into the empty space where the snorkel would have feed down into.

  • 5 weeks later...
Brendonams Enthusiast

Brendonams

Posted
Posted

With the tutorial on moving your CAI to behind the front bumper, I have a few questions.

1. Wont water collect in it being so low and un protected?

2. will it collect a lot of dust being low?

Captain Natro Grand Master

Captain Natro

Posted
Posted

well i guess you could say why bother with a skyline of any type whilst a full time student etc, but yeah i'd be leaning towards the new motor option, the n/a rb25 is worth about as much as an rb30 lol

where r these cheap nas for the price of an rb30,

iseekool Veteran

iseekool

Posted
Posted

Already said, but a new DE Motor are as cheap as they come now. Even a DE NEO can be had for under $1k at times.

Stock air box is the best way to go on an N/A Skyline. I'm not entirely sure with the R33 without looking for a pic, but the air feed on the N/A R34's is better than most custom set ups for an N/A.

A K&N Panel in the stock box, with a cold air feed going into the box if necessary, is going to be more than ample. An N/A Skyline isn't going to surpass the capability of a K&N Panel.

+1

IMHO - The K&N or any quality high flow panel filter will be more than good enough. Even on a lightly modded turbo model the highflow panel filter will still be more than enough.

I was a student when I bought my R34. Panel filter and a high flow cat gave it a bit more perk in the mid to high range. No difference in the low end.

iseekool Veteran

iseekool

Posted
Posted

So what gave the idea to my previous owner of the N/A rb25 to put a POD filter on it?

I'm guessing little knowledge... Don't know.

One thing to keep in mind is Nissan engineers (any car manufacturer) that work on power trains have unlimited dyno time and are highly trained/educated. Joe Blow thinks a pod filter is better and bolts it on....

Funny thing is pod filters are actually cheaper than all the complex piping and airbox systems.... So why would Nissan bother putting such an expensive and complex setup if it was crap in the 1st place....

  • 4 months later...
Keith w Enthusiast

Keith w

Posted
Posted (edited)

My mechanic told me that Iv'e got an oil leak problem with my engine and the cost effective preventative measure against any possible damage was to install the catch can. I'm not 100% on what the exact problem is aside from being told that I'll have to rebuild most of the engine /sigh.

Pump like 3 bottles of or wynns engine oil stop leak into that sucker :yes:

Edited by Keith w
iamhe77 Grand Master

iamhe77

Posted
Posted

I'm guessing little knowledge... Don't know.

One thing to keep in mind is Nissan engineers (any car manufacturer) that work on power trains have unlimited dyno time and are highly trained/educated. Joe Blow thinks a pod filter is better and bolts it on....

Funny thing is pod filters are actually cheaper than all the complex piping and airbox systems.... So why would Nissan bother putting such an expensive and complex setup if it was crap in the 1st place....

Same reason they put all those resonators on there, induction noise (although the resonators also allow any "extra" air in the intake somewhere to go when you step off the throttle).

Why did Ford put a large pod on the supercharged V8 GT? My guess is they needed a shit load of air going in there and didn't have the space for a massive panel filter.

Hanaldo Grand Master

Hanaldo

Posted
Posted
Same reason they put all those resonators on there, induction noise (although the resonators also allow any "extra" air in the intake somewhere to go when you step off the throttle). Why did Ford put a large pod on the supercharged V8 GT? My guess is they needed a shit load of air going in there and didn't have the space for a massive panel filter.

Very very different cars from factory, can't really compare them. You're talking a 335kw V8 compared to a ~180kw straight 6. Ford also designed it to work properly with a good heat shield and a cold air intake, something that most people who bolt on a pod filter don't bother doing.

iamhe77 Grand Master

iamhe77

Posted
Posted

Actually I wasn't comparing engines, just stating that pods are quite useful if implemented correctly... and that they can be a requirement when a panel filter is not up to the task. In the end, the engine will only take as much air it needs so no harm in getting the largest filter you can.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Tein Circuit Master- rebuild worth it?

      By MBS206 · Posted

      If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • MBS206
      Best place to order Authetic R32 Parts in Japan

      By MBS206 · Posted

      Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • MBS206
      NC MX5

      By MBS206 · Posted

      Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • MBS206
      Blue slip

      By MBS206 · Posted

      I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...