Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different. Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality. Whilst on BP98 in adelaide knock was rarely over 20. With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120! Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low. There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in! I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different.  Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality.  Whilst on BP98 in adelaide knock was rarely over 20.  With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120!  Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low.  There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in!  I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

Hi Sly, in Adelaide you got Ultimate from Kwinana, arguably the best refinery in Australia. Made from NW Shelf crude, arguably the best in the world outside Saudi Arabia. When you come to Sydney you get Optimax from Clyde arguably the worst refinery in Australia, not that Geelong is much better. Made from Bass Straight crude, also arguably the worst in Australia.

There is ongoing capital expenditure at both Clyde and Geelong, aimed at fixing their consistency problems. Plus they simply have to, because of the emmisions demands. From what I can tell, if the 2005 standards where applied now, they wouldn't be able to sell Optimax. Too much sulphur, for one.

Ask the high performance 2 stroke guys (bikes and karts), their engines give fuel a real work out, that's why they use Elf. Not only higher performance from a superior formula, but consistent quality as well. You get what you pay for.

i see alot of people have trouble with optimax, i have run my car on optimax for a month now and car is running great not missfiring or anything. i tend it hard to find bp ultimate around my area. i have used it once and it felt the same as optimax. as for mobil my car runs like shit on it

I am yet to find a Japanese import with stock ECU run better on Optimax than BP Ultimate, one thing I have noticed with Optimax is, it gives the greatest amount of K's per litre. (R32 GTSt, R33 GTS25t, R33 GTR, Forester S/tb, Legacy GTB, GC8 WRX, Pulsar GTIR all seem to like BP Ultimate, and Mobil Synergy 8000 best.)

I work in a motorcycle shop in Rockhamton and the first thing we say to a customer when they ask what fuel to run in their bikes is DONT RUN OPTIMAX then followed by what fuel is suitable. The fuel is heavier and thicker and it fouls the plugs very very quikly this goes for all bikes and jet skis. many a time have we had someone come in with a fresh full tank of optimax wondering why their bike stopped working. :bonk: I guess it might not matter in a car becuase the sensors might pick it up and the ECU would a adjust the mixture in some way. It also turns your plugs a funny colour aswell i guess thats because of the type of chemical used to boost the octatane. Pity you cant run good ol avgas in your cars becuase you cant beat it :D

by the way, i dont notice any power difference or poping in my exhaust using optimax, however i do find i get more k's from a tank of ultimate..

and on another note, Synergy 8000 (or whateva it is) and BP ulitmate are the SAME! they come from the same refinary, from the same tanks and often from the same trucks. its not unusual to see a bp truck in the Mobil on the pacific hwy. and i think the one on epping road too...

my 2 c...

Hi guys. I work in the oil industry so know a bit about it, but not too much on the additives in refining. In sunny WA, the BP Kwinana refinery supplies all fuel to all outlets of all other brands - they are the only refinery within a coupla thousand clicks, so that would seem to make sense! But they just sell raw refined product to the other guys. Shell, Caltex and the rest add their own recipes of additives to produce their "own" fuel. BP may, depending on the contract, add some basic additives for some buyers. Being selfish, money-grabbing capitalists, BP don't sell their 98 octane Ultimate to anyone else in WA - especially not Shell!! So Shell have to make do with a raw 95 octane product, which they chuck a few things in to give it the yellow pecten touch :thumbdwn: .

As for the NW Shelf crude being wonderful stuff, you have to be careful which field you are talking about! Most production currently comes from the Wanaea & Cossack fields (operated by Woodside) and the Griffin field (operated by BHP Billiton). These produce a nice, light crude ;) (quite different from each other, but not dissimilar to Arabian Light), which fetches a good price on the spot market. The Wandoo field (Exxon Mobil), Stag (Apache), Legendre :dump: (Woodside) and a load of smaller fields (ChevronTexaco and Apache, mainly) all produce crude ranging from nice, light crude :aroused: to thick, 'orrible, gungy stuff that is not exactly the refiners dream :throwup: . Then their are the Timor Sea fields, including Laminaria (Woodside), which produces a crude that you could put straight into your diesel motor and run it with no problems. In refining terms, you can produce a high octane cut from any crude, but you will have to work harder with some than others and your yield will vary depending on the feed stock. Refiners are always trying to plan the mix in their feed stock tanks, and hence the stuff they are buying (often when it is on the high seas), so as not to have to change operating parameters too much in the crude distillation units.

So BP Kwinana will be buying crude from all over, as will the Eastern states refineries. And they will try to buy stuff that they are set up for, without being raped on price on the spot market.

Meanwhile, given that it is the only 98 octane fuel available here, I use BP Ultimate. And it still gives me black crap on the back of my white car! (Just wait until I get an S-AFC!

Hope this helps. Interesting thread!

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...