Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different. Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality. Whilst on BP98 in adelaide knock was rarely over 20. With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120! Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low. There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in! I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

those who state that they notice no difference in the premium fuels, remember that pretty much EVERY one of our cars are different.  Be it just different plugs to a fully reprogrammed ECU. It makes sense that those members who have had their ECUs tuned with a certain type of fuel in their tank are more likely to notice inferior fuel, as the tunes are specific to the type in the tank at the time.

With the FC displaying knock level i find it a good indicator of the fuel quality.  Whilst on BP98 in adelaide knock was rarely over 20.  With the trip over to sydney i was forced to use vortex at one stage, and had knock over 120!  Now in sydney i found optimax up to 80 knock, and the BP98 here sometimes goes over 50, but usually it stays low.  There definitily seem to be inconsistencies here in NSW for fuels.

but yeah basically the vortex stuff i consider the worst you can put in!  I'll have to find a mobil and try some 8000 and see how it goes before the drags this wednesday!

Hi Sly, in Adelaide you got Ultimate from Kwinana, arguably the best refinery in Australia. Made from NW Shelf crude, arguably the best in the world outside Saudi Arabia. When you come to Sydney you get Optimax from Clyde arguably the worst refinery in Australia, not that Geelong is much better. Made from Bass Straight crude, also arguably the worst in Australia.

There is ongoing capital expenditure at both Clyde and Geelong, aimed at fixing their consistency problems. Plus they simply have to, because of the emmisions demands. From what I can tell, if the 2005 standards where applied now, they wouldn't be able to sell Optimax. Too much sulphur, for one.

Ask the high performance 2 stroke guys (bikes and karts), their engines give fuel a real work out, that's why they use Elf. Not only higher performance from a superior formula, but consistent quality as well. You get what you pay for.

i see alot of people have trouble with optimax, i have run my car on optimax for a month now and car is running great not missfiring or anything. i tend it hard to find bp ultimate around my area. i have used it once and it felt the same as optimax. as for mobil my car runs like shit on it

I am yet to find a Japanese import with stock ECU run better on Optimax than BP Ultimate, one thing I have noticed with Optimax is, it gives the greatest amount of K's per litre. (R32 GTSt, R33 GTS25t, R33 GTR, Forester S/tb, Legacy GTB, GC8 WRX, Pulsar GTIR all seem to like BP Ultimate, and Mobil Synergy 8000 best.)

I work in a motorcycle shop in Rockhamton and the first thing we say to a customer when they ask what fuel to run in their bikes is DONT RUN OPTIMAX then followed by what fuel is suitable. The fuel is heavier and thicker and it fouls the plugs very very quikly this goes for all bikes and jet skis. many a time have we had someone come in with a fresh full tank of optimax wondering why their bike stopped working. :bonk: I guess it might not matter in a car becuase the sensors might pick it up and the ECU would a adjust the mixture in some way. It also turns your plugs a funny colour aswell i guess thats because of the type of chemical used to boost the octatane. Pity you cant run good ol avgas in your cars becuase you cant beat it :D

by the way, i dont notice any power difference or poping in my exhaust using optimax, however i do find i get more k's from a tank of ultimate..

and on another note, Synergy 8000 (or whateva it is) and BP ulitmate are the SAME! they come from the same refinary, from the same tanks and often from the same trucks. its not unusual to see a bp truck in the Mobil on the pacific hwy. and i think the one on epping road too...

my 2 c...

Hi guys. I work in the oil industry so know a bit about it, but not too much on the additives in refining. In sunny WA, the BP Kwinana refinery supplies all fuel to all outlets of all other brands - they are the only refinery within a coupla thousand clicks, so that would seem to make sense! But they just sell raw refined product to the other guys. Shell, Caltex and the rest add their own recipes of additives to produce their "own" fuel. BP may, depending on the contract, add some basic additives for some buyers. Being selfish, money-grabbing capitalists, BP don't sell their 98 octane Ultimate to anyone else in WA - especially not Shell!! So Shell have to make do with a raw 95 octane product, which they chuck a few things in to give it the yellow pecten touch :thumbdwn: .

As for the NW Shelf crude being wonderful stuff, you have to be careful which field you are talking about! Most production currently comes from the Wanaea & Cossack fields (operated by Woodside) and the Griffin field (operated by BHP Billiton). These produce a nice, light crude ;) (quite different from each other, but not dissimilar to Arabian Light), which fetches a good price on the spot market. The Wandoo field (Exxon Mobil), Stag (Apache), Legendre :dump: (Woodside) and a load of smaller fields (ChevronTexaco and Apache, mainly) all produce crude ranging from nice, light crude :aroused: to thick, 'orrible, gungy stuff that is not exactly the refiners dream :throwup: . Then their are the Timor Sea fields, including Laminaria (Woodside), which produces a crude that you could put straight into your diesel motor and run it with no problems. In refining terms, you can produce a high octane cut from any crude, but you will have to work harder with some than others and your yield will vary depending on the feed stock. Refiners are always trying to plan the mix in their feed stock tanks, and hence the stuff they are buying (often when it is on the high seas), so as not to have to change operating parameters too much in the crude distillation units.

So BP Kwinana will be buying crude from all over, as will the Eastern states refineries. And they will try to buy stuff that they are set up for, without being raped on price on the spot market.

Meanwhile, given that it is the only 98 octane fuel available here, I use BP Ultimate. And it still gives me black crap on the back of my white car! (Just wait until I get an S-AFC!

Hope this helps. Interesting thread!

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...