Jump to content
SAU Community

Recommended Posts

he is such a good guy... didnt think he would still remember me

told him the issue and he did say the problem I have is one that could occur due to valves.. although he did say that valve problems are pretty rare

he also said he had a method of determining whether it is actually the valves without opening the head!

so will def be getting the car looked over by him (not sure if i should tell PT though)

was going to call him tomorrow but he called me lol... was very impressed! should have just gone to him again lol

Edited by usmair

I might have misinterpreted him

i think he meant due to the cost involved in changing springs... it might be financially better to 'do' the head (if i wanted to) seeing as we're spending $ on labour regardless

I can understand this, a full reco'd head might be better value than doing just the springs on your head. Though you'd want to make sure it was a reputable company that supplied it.

Usually valve float occurs at a resonant point in the rev range meaning that the power falls away momentarily. You usually see the mixtures do weird things at that point as the exhaust valve stays open longer.

If your exhaust back pressure is high you will usually float the exhaust valve on a turbocharged car given the profiling of the inlet is similar to the exh.

Does the power stay on higher at lower boost levels?

Usually valve float occurs at a resonant point in the rev range meaning that the power falls away momentarily. You usually see the mixtures do weird things at that point as the exhaust valve stays open longer.

If your exhaust back pressure is high you will usually float the exhaust valve on a turbocharged car given the profiling of the inlet is similar to the exh.

Does the power stay on higher at lower boost levels?

Tuner said power isnt falling momentarily... it just starts to lose power consistently after 6300RPM... its not like it temporarily loses power then jumps back up :S

the back pressue shouldnt be an issue... its got big front pipes and a 3.5" exhaust

the power is staying similar thought! it made 317kw on 22 psi with a boost leak under the plenum from a gasket

what does that suggest?? (sorry complete noob here)

he didnt mention anything about knocking... just seems to be stuck at 320kw

Which makes it sound more like a flow issue, and not exhaust side as that tends to send temps up and hence detonate.

Which leaves valves, intake, leaks??, turbo, cam timing etc.

"peak power right now is at 6300... car just starts struggling to breath and loses power"

Sounds like an exact thing i had.. Drop a set of Tomei TypeB 9.15mm in. Ignore what everyone says about running standard cams and try again and you won't live to regret.

Everyone is always talking highly of Unigroup but i find the car's he tunes runs quite low power and they are only in RWD/2WD? Too safe of a tune perhaps? Who knows...

"peak power right now is at 6300... car just starts struggling to breath and loses power"

Sounds like an exact thing i had.. Drop a set of Tomei TypeB 9.15mm in. Ignore what everyone says about running standard cams and try again and you won't live to regret.

Everyone is always talking highly of Unigroup but i find the car's he tunes runs quite low power and they are only in RWD/2WD? Too safe of a tune perhaps? Who knows...

can you please provide further details of your situation?? even the tuner said standard cams are perfect for -9s

yeh Yavuz only has a 2 wheel dyno so readings are in RWD... he does tune them to last so they might be slightly lower in power perhaps...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...