Jump to content
SAU Community

Recommended Posts

Guess what time it is - that's right DECA TIME!!!

It's on again and I have booked us the hotel in Shepp for the upcoming DECA.

When: Fri 24 & Sat 25 February

Where: Tirana Motor Inn

Address: 33 -37 Wyndham St, Shepparton

Cost: $50 per person per night (if sharing)

$85 per night to have a single person in a room by themselves

If you would like a room, please let me know as soon as possible, they will want to release to the public whatever rooms we are not using in a few weeks.

I need to know:

* nights staying

* how many people

* what bed configurations you need (ie twin, double etc)

If you are coming by yourself, that's fine, just let me know and I will team you up with somebody else to share a room with.

Let me know here, by email, by PM or by phone.

The sooner you tell me, the easier you make it for me.

*** NOTE - if the hotel books out, preference will be given to those staying both nights

- if you ask for a room and don't turn up without letting me know, you get added to my black list (you ppl are starting to ruin it for everyone)

Entries coming soon!!!

Link to comment
https://www.sau.com.au/forums/topic/389069-deca-accommodation-24-25-feb/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Fri/Sat

Bec

Ryan

Leon

Russ/Ben F/Campbell/Bobby (family room)

Femino & Kleo + Dean (family room)

Tim & Amelia

Mark & Libby

Odium + 2 (twin room)

bluey 33 + 1 (twin)

Wayne (single)

Juliette (single) & Sunday

Keiran + Lauren, Robbie Williams & Taylor (1 dbl/2 sngls)

Chris, Dan, Jett + 4 mates (2 x 1 dbl/2 sngls)

Gary + GF (double)

Jake (single)

Paul & Kat

Fri only

Ash (single)

Lowth & Craig

Leons 4 mates

Sat only

Anna/Luke

DECA is 100% open to anyone, and everyone.

More the merrier. It's a great bunch and always a good 50-60 people up for the weekend of fun :)

I'll get onto Team FA, i think a few wanted to come up for a Fri.

Cheers, been up a few times but just taken photos and enjoyed the spectating. Doing 6 broken manifold studs tomorrow on the 33, then car goes to panel shop. If car is not out of panel shop by DECA can I just bring my 180 or should I PM whom ever is in charge of the event to let them know?

Make sure you do them all - if you only fix the broken 6, 3 months later another will break... Hence do them all @ once, saves doing it again for another 10 years.

When entry forms come up you can just put down whatever car, if it changes on the day/last min that's not a major issue either. Happens sometimes.

Yea doing all 12. Had this issue on old motor, fit new gasket and new studs after snapping 5 then blew motor 1,000km later.

Fit motor from wrecked car(knowing I should of done the gasket and studs) and it has bitten me in the arse 3,000km later. :domokun: Hoping I havn't got an ongoing issue with it causing them to snap. Exhaust hangers are all ok (not using cat one though)

BEC can u put me + partner down for a room for Friday night. Twin cause partner will most likely not be my partner :whistling:

DECA is 100% open to anyone, and everyone.

More the merrier. It's a great bunch and always a good 50-60 people up for the weekend of fun :)

I'll get onto Team FA, i think a few wanted to come up for a Fri.

how do you put your name down to participate in the event?

Fri only

Jake (single) <<-LOOSER (stay Sat night, you know you will anyways)

Pretty sure its spelt LOSER... LOOSER is what he'll be if you throw him in a shared room with Campbell and the boys...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...