Jump to content
SAU Community

Recommended Posts

Hi all,

Was hoping for some advice, just lost my ceramic turbine out the exhaust of my stock Series 2 R33 with the RB25DET and who should I get it repaired by, or should I just replace it?

Only got a stock motor with high kays on it... (270k), standard in guard I/C, standard ECU and about 10psi.

Suppose, I must have either hit more boost than that a few times for it to let go, that or I had a bearing let go.

Either way the turbine wheel has gone now and the car lost a lot of power (no really! lol) and the rear seal was weeping a little oil so I had a smoke screen following me at any rev above idle.

Got the car home, without upsetting too many people but I need my daily driver back!

Not interested in rebuilding the motor on this car or making it a high power, just need it back without too many hassles now or in the future. Really want bolt on and am happy to do a bit of work to get it done.

Who can overhaul?

Can I send it somewhere and get a standard overhauled turbo sent to me?

Can I buy a new spool assembly and bolt my bits on them?

What is the most cost effective?

Where do I buy?

Probably don't want to spend heaps but I don't want to buy cheap shit either, will possibly park the car or move it on soon.

Any ideas, who can help me please? Need the car back on the road asap.

I am in Geelong, Victoria not that this will make much difference!

Thanks in advance for any advice.

Stephen

Hypergear rebuilds them for about 8-900..will be better than it was, have steel wheels probably make a little more power too

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

or just chase up a S/H unit on the classifieds..for 2-300$

Hypergear rebuilds them for about 8-900..will be better than it was, have steel wheels probably make a little more power too

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

or just chase up a S/H unit on the classifieds..for 2-300$

Thanks Artz... very much appreciated. Lots to read on that link. lol

highflow turbos are only as good as the person doing the job. you cant say a highflow will kill your motor with supporting mods.

had one on a SR20 for 3 years seeing 18psi almost daily

with 270k on it, i would source another stock one and fit that. a high flow will kill your motor fast

highflow turbos are only as good as the person doing the job. you cant say a highflow will kill your motor with supporting mods.

had one on a SR20 for 3 years seeing 18psi almost daily

He is saying that with more boost from a high flow it will kill a high km motor easily... not that the high flows are dodgy....

As for replacing the turbo.. good option with piece of mind is as mentioned get Hypergear to rebuild it, alternatively you can look in the for sale section here for people wrecking or parting out skylines... you can pick up a good condition stock turbo for about 200-300. the only thing is how long will it last again as they are getting quite old now.

He is saying that with more boost from a high flow it will kill a high km motor easily... not that the high flows are dodgy....

As for replacing the turbo.. good option with piece of mind is as mentioned get Hypergear to rebuild it, alternatively you can look in the for sale section here for people wrecking or parting out skylines... you can pick up a good condition stock turbo for about 200-300. the only thing is how long will it last again as they are getting quite old now.

think I will chance it and go stock.. if I can find one cheap enough.

wish the car was newish like 12 years ago when I bought it.

nothing like the choices to modify back then, unless you spent up big.

thanks everyone...

I don't know how much you can trust another second hand turbo. In all honestly most cars will have in excess of 150000km, hell even 200000km on them, so you will be buying a turbo just as old as the one you had let go...

I don't know how much you can trust another second hand turbo. In all honestly most cars will have in excess of 150000km, hell even 200000km on them, so you will be buying a turbo just as old as the one you had let go...

Very true, however I think I know why this one let go... so I don't plan on letting that happen again.

Besides, don't go looking for R32 turbos. Try to find as late an R33 one as you can, or an R34 one if possible. Newer, less miles. Also less stress in your application (ie they can be boosted higher before failing when used on an R32, so at standardish boost should last well).

The best option would still be high flowing the stock turbo if you are keeping the car. as most of 2nd hand turbos are at their last legs either way. We replace not just larger steel wheels, but the complete CHRA, its more of getting a brand new turbo back in stock housings.

You do not need to replace the turbo again on engine change or rebuild, it can produce lot more power with better relaibility then stock turbo once upgrades are installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...