Jump to content
SAU Community

Recommended Posts

Hey guys, recently bought a r34 gtt and I've found when hitting high boost the engine light flahses on and off until i let it off boost.

It has a Z32 and a power FC and is on half a bar of boost.

Previous owner said it is tuned to run on 98 and I put a quarter of a tank of 95 (couldn't find 98 at the time), could this be the issue as the tunes set up for 98? or could it be faulty AFM or something else? I'm scared to put my foot down in boost, don't wanna break anything. >_<

Any help is appreciated :)

Put octane booster or 98 in it before putting your foot down if it's tuned to run 98 its a must I suggest not driving on boost at all as it will be running lean

Edited by Bsa

Your engine is knocking. If its tuned for 98 and you have no other choice but plain old 95, dont push it at all.

If you push it you risk detonation damage to your pistons if it happens for too long.

Engine light flaahing is the pfc telling you its knocking. Do you have a hand controller?

Ty.

+1, your engine is pinging and it is extremely dangerous.

turn the boost down (or even off), don't use full throttle until you have refilled the tank with 98.

If it still pings (light flashing) after a new tank of 98 octane, you need to get the computer re-tuned on a dyno

Just use the hand commander and pull a couple of degrees timing out of it until you can do a complete fill with 98.

Go Settings then Ign/Inj and take some timing out of it.

These temporary changes are deleted as soon as you turn the engine off, all good, tune is unaltered.

That's what this function is for, trial tweaks that can be instantly erased.

.. Going on the assumption that he has a hand controller.

Definately a good band-aid fix for now, thats for sure. Dont wait until you're on empty to put 98 in.. Might as well do it now. You might be diluting the 98, but 96.5 (as an example) octane is better than 95.

+1 what Duncan said. You might as well get it tuned up anyway. Preventative maintenance is always a good thing.

Ty.

Blake using 95 won't make it run lean but 95 has a lower knock resistance.

OP has the engine light ever flashed before with 98 octane?

the engine light can flash due to :

high knock

afm maxing out

injectors maxing out

i doubt on 7psi that the inj or afm are maxing out..

do you have a hand controller?

just bought the car... it's got a boost controller and another gizmo to do with the power fc... it's only on like .6 bar. not sure if it flashed previous... Been driving it around avoiding boost and I'll fill it tomorrow a full tank of 98.... think it has about a quarter on the gauge of 95

will be booking it in for a service next week at chasers n see what they think if the 98 doesn't fix it by then and just drive the daily til then

thanks guys appreciate the help!

Or maybe the previous owner just installed a PowerFC without doing any tuning. The stock ignition map is super aggressive on them.

When he/she said tune, did he or she just poke about with the AFM setting and part of the injection map?

Take the return line off the arse end of the FPR, put a longer hose on te reg, start car and drain into a Jerry. Put the fuel in the daily and fill up with 98.

Job done.

this. unless your patient enough to drive it sedately until empty, which most people arent.

dont use any sort of octane booster, will only cause more trouble.

I wasn't suggesting he use the stock ecu all the time... Just suggesting he try it out to trouble shoot and see if the engine light still comes on under boost. Like trying a different AFM to see if your AFM is stuffed..... Try a different ecu to see if its the tune/ecu or something else. Considering the current owner bought it this way it may help it may not. If he is going to get it re-tuned why not get it tuned on a lesser octane fuel then always use 98 octane?

I wasn't suggesting he use the stock ecu all the time... Just suggesting he try it out to trouble shoot and see if the engine light still comes on under boost. Like trying a different AFM to see if your AFM is stuffed..... Try a different ecu to see if its the tune/ecu or something else. Considering the current owner bought it this way it may help it may not. If he is going to get it re-tuned why not get it tuned on a lesser octane fuel then always use 98 octane?

The stock ecu doesn't flash the engine light when it knocks. I really doubt there is a tune on the ecu. I recon its the stock pfc map. None the less, your car is pinging. Change the fuel or use the hand controller to get rid of some timing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...