Jump to content
SAU Community

Recommended Posts

hey guys i know this prob been coverd 1000 times. but i cannot dig up any info on it im after new injectors for my rb20det, im wondering if there is any plug and play ones out there i dont really wanna stuff around with wiring and shit i dont mind upgrading the fuel railbut if someone could direct me in what is best im going for atleast 200rwkw thanks in advance..

  • 8 months later...

Hey I'm in the same boat, standard gtr inectors are like 440cc or something like that? I'm aiming for 200kw but hopefully 250kw eventually (from my rb20) anyone know if gtr injectors will make much more than 200kw? And, would a normal work shop be able to wire them up or do u have to buy extra stuff?

Depends how much power you want to make. The 555cc ones are still in my car, and on E85 my fuel system is at it's limit and is making 242rwkw, if I got a bigger pump and 1000s I guess I could make more, or if I wanted to run on high boost high revs a lot, but it's a street car and only ever gets a boot occasionally, so I don't really need to. Buy something that suits the what you are going to use the car for and how much power you want to make while doing it.

you can crack 200kWs with stock injectors...

440cc GT-R injectors are a straight drop in, if you can't find the resistor pack, just buy a 6x resistors from Jaycar and make your own. I wrote a post back years ago on how to do it either on NS or here, CBF searching lol

Is the resistor pack something that u need to buy separate or is it something actually on an rb26 that u can buy I ask this because I've found gtr injectors but don't know how to go about getting the resistor pack

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...