Jump to content
SAU Community

Tuning C34 Stagea

fritters77

By fritters77,
in Four Door Family & Wagoneers

 Share

Recommended Posts

wolverine Grand Master

wolverine

Posted
Posted

I suggest bringing your car over to the west of Sydney to Unigroup. It's a long drive but worth it.

I think DART are closer to you and also by reputation do good work.

I know nothing of Port Hacking Automotive so no help from me there but the best advice I can give is to take it to the best tuner possible who has a good history with RB's.

Nistune is the cheapest way to go and does a reasonable job.

MaR1LyN Apprentice

MaR1LyN

Posted
Posted

not sure if IS Motorsport do nistune, but that shop is crazy good. call them and speak to Indy.

they are located in rockdale, he hosts dyno days etc at his shop.

9599-9918: IS Motorsport

There the guys I take my car too. They don't do Nistunes, I have been trying to convince them for a while but no luck so far

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Take your car to Yavuz at Unigroup. I am sure there must be other competent tuners in Sydney but he is the only one whose fame has spread across the Tasman! Seriously its worth going out of your way to find a really good tuner and you will never regret paying for a quality tune.

GoldZilla Grand Master

GoldZilla

Posted
Posted

I suggest bringing your car over to the west of Sydney to Unigroup. It's a long drive but worth it.

Nistune is the cheapest way to go and does a reasonable job.

Take your car to Yavuz at Unigroup. I am sure there must be other competent tuners in Sydney but he is the only one whose fame has spread across the Tasman! Seriously its worth going out of your way to find a really good tuner and you will never regret paying for a quality tune.

I have no hesitation in recommending Yavuz @ Unigroup Engineering too - he's smart, but also very humble, very down-to-earth and very busy due to the quality work he does. I've been going to him for a while now (I've got a PowerFC on my Stagea - it was installed by someone else, but they cost more and took much longer to do everything, and were further away from me too). The only downside to going to Unigroup is that they only have a RWD dyno, but once the front driveshaft is removed (either by you or them) that won't be an issue.

GoldZilla Grand Master

GoldZilla

Posted
Posted

Cheers thanks for the input .......

Might go with Toshi he has done a shit load of cars from what i can find .....

still have a month before i need to decide ......

thanks Again for your input guys.....

Oh, and Yavuz has done a shitload of cars too, and not just Nissans.

fritters77 Enthusiast

fritters77

Posted
  • Author
Posted

I have no hesitation in recommending Yavuz @ Unigroup Engineering too - he's smart, but also very humble, very down-to-earth and very busy due to the quality work he does. I've been going to him for a while now (I've got a PowerFC on my Stagea - it was installed by someone else, but they cost more and took much longer to do everything, and were further away from me too). The only downside to going to Unigroup is that they only have a RWD dyno, but once the front driveshaft is removed (either by you or them) that won't be an issue.

Ok thanks for that,,,,,i will defiantly consider them for sure he really sound like he knows what hes doing .......

Any idea on what sort of cost for tuning a Power FC or Nistune if they do them.....

cheers

533 RYC Proficient

533 RYC

Posted
Posted

Scott Kerner at Insight Motorsport at Arndell Park (near Eastern Creek)! Excellent tuner & an electrical engineer to boot!! Have seen many great cars on his 4WD dyno (Dyno Dynamics from memory), including Glenn Seton's old Peter Jackson Ford Sierra RS500 touring car being tuned for a track day. Also a BA pursuit ute with an ATI Procharger punching 450+kw at the wheels on a safe street tune!!!!!!!!!! Don't know if he does Nistune, but he's an old skool Datto guy. He chipped my R32GTST spare ECU for $50!!!!!!!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
    • MBS206
      Factory oil temp sensor in a RS4V without gauges?

      By MBS206 · Posted

      Sounds like the oil pressure light is wired into the oil temp sensor... As it warms up, resistance on temp sensor reduces, hence more current can flow and the dash light gets brighter.
    • acsplit
      Torana Lx Gtr Hatch, Lots Of Pictures

      By acsplit · Posted

      f**k yeah, looking good
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Got the front subframe and suspension in.    
    • Dose Pipe Sutututu
      R34 GTT AC short cycling ? Normal behaviour?

      By Dose Pipe Sutututu · Posted

      If it's cold in summer, then no issue. If it's cutting out every few seconds and you're not reaching your target temp, then there's an issue. One could be the pressure switch and the other issue could be the temp probe inside the evaporator.
×
×
  • Create New...