Jump to content
SAU Community

Recommended Posts

Depends what parts you are getting.

Manifold $1400

Turbo $1900

Wastegate $600

Dump $500

Lines, fittings and gaskets $400

Intake $200

Tune $800

Labour $1000

Id say thats about right.

i recently paid:

  • Gt3582R with v band housing from sonic performance for $1350
  • Precision 48mm waste gate from the realstreetperformance in the USA for $350
  • Kinugawa braided lines from ebay, good quality (had them pressure tested to 300psi and no leaks) $70
  • gaskets were only $50 in total for manifold gaskets and oil drain gasket & t3 turbo gasket,
  • $1100 for custom turbo manifold made from 3mm stainless steam pipe,
  • $400 for dump and wastegate pipe to cat
  • $100 for intake and hot side cooler pipe.

Fudge you guys buy some expensive gates.. i got 2 for 500 bucks (Tial 38mm with all the springs)

I got my Borg warner s300sx 83/75 for $950 plus delivery from the states, but pretty sure GCG sells them (its not an EFR shitbox one before anyone jumps in)

Exhaust can get pricy depending on how big/type of metal/ and if u need a high flow cat, also need to plumb in the gate..

I did all my lines and fitting myself for my single conversion on my 26 and it wasnt 400 bucks, wasnt even 300 and thats with enough braided line and fittings to plumb in twin gates.. got my stuff from Pirtek

Just take the time to do as much as you can and save your self a couple of grand... all that stuff u wanna do is easy bar making a new dump

i got a twin scroll manifold that was from full race which was pretty pricy but the six boost ones are pretty cheap..

Edited by GTR_JOEY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...