Jump to content
SAU Community

Recommended Posts

Auditioning may not be a bad idea, thanks Dale. Curious, was $950 landed or just the purchase price? If its landed and I can get a similar deal then the decision would be an easy one to make =)

I'm not really the best example unfotunately.

Mine was already in Australia, and was being sold by a guy who fell on hard times. This was at a time when they were still well above $1300 landed; so I couldn't refuse.

Edited by Daleo
  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

Alrighty then, we've got some quotes back:

Mr Streeter - $1,142 delivered (depending on Exchange rate)

Imp Mnstr - $1,300 delivered (8 weeks)

TurboAlfa - $1,499 delivered (worst case scenario)

+ Dump & Mid - $700

Totalling $1,842 at its cheapest

The alternative would be local options:

Dump pipe - $470

Mid w/out cat - $230

2muffler cat back - $870

Totalling $1,570.

My next and only question is whether the Legalis is worth the extra $272? ...I'm not so sure but then I've never had any experience with aftermarket exhaust systems

My next and only question is whether the Legalis is worth the extra $272? ...I'm not so sure but then I've never had any experience with aftermarket exhaust systems

Yes.

There is a reason Nismo use the same main body design for their M35 exhausts.

Edited by iamhe77

Yep stick with a Jap cat back, the little extra is worth the research and quality of them and just get one of the 3 Aussie made dumps and front pipes. I would keep a high flow cat in the mid pipe if only for appearance to the blue boys.

I've never had a Jap cat back, I thought the main reason was noise, since they're all certified to a certain (quiet) volume.

I'm extremely happy with mine as is, and for me it's right in the sweet spot volume wise. That said, if mine is too loud, you can just order it with a bigger muffler, problem solved?

Depending on who does it locally, either way you're going to get a quality result. I think it'll probably come down to volume, and if it goes to someone who hasn't got experience building exhausts for these things it'll probably be too loud. Mine was first time, but at least you can go back to the local person and get it fixed.

get a scotty dump, no question on quality. then again im biased as i owned one lol

I think all 3 of the dumps that are usually mentioned will and are, all of good quality. It will just depend on the style you want and pricing your happy with.

Thanks for your help and opinions guys. I've done a bit of reading and would be happy to invest a little more in the Jap system the only problem or hurdle that remains would be to convince the better half of the investment value.

We're still yet to receive word on when the car will be shipped over so I'm deliberating as to when to put forward any orders, ie whether to wait till its landed or have everything ready to go once it arrives.

It seems, though, that we'll have ample time to ponder the pros and cons of each. =)

Q: How much difference does a cat back make to performance if you do the dump and mid pipe?

I did mine in one hit, I'd have no idea. Is it even worth it if you want a quiet exhaust?

Q: How much difference does a cat back make to performance if you do the dump and mid pipe?

I did mine in one hit, I'd have no idea. Is it even worth it if you want a quiet exhaust?

I did my dump pipe first, and there was a big difference in the response of the turbo, and a reduced amount of throttle required to hold the same acceleration as compared to the OEM strangler. Also, my fuel economy improved (once I removed my lead right clog)blush.gif

This say to me that there is a fairly significant hike in torque when the restriction is removed, and I'm sure there is a decent HP increase to go with it.

I love the rampant selling in these threads. :nyaanyaa:

Here's some unbiased advice:

Buy the cheapest dump and front pipe you can from (I believe the current 3 options are Scotty, Rex Kelway and AM).

If you want more performance/noise, either decide between a locally made cat back or one from Japan. The jap unit will likely be better made than the local unit unless you find someone dedicated like AM or Rex Kelway, and personally I'd always go the Jap unit since there's better resale.

Q: How much difference does a cat back make to performance if you do the dump and mid pipe?

I did mine in one hit, I'd have no idea. Is it even worth it if you want a quiet exhaust?

Noticeable difference.

I ran a Legalis with a Kakimoto front pipe and stock dump for some time.

No dyno but the same drive everyday showed higher boost when putting the boot in and slightly less throttle up the hills.

I love the rampant selling in these threads. :nyaanyaa:

Here's some unbiased advice:

Buy the cheapest dump and front pipe you can from (I believe the current 3 options are Scotty, Rex Kelway and AM).

If you want more performance/noise, either decide between a locally made cat back or one from Japan. The jap unit will likely be better made than the local unit unless you find someone dedicated like AM or Rex Kelway, and personally I'd always go the Jap unit since there's better resale.

Spot on Jase. thumbsup.gif

I did my dump pipe first, and there was a big difference in the response of the turbo, and a reduced amount of throttle required to hold the same acceleration as compared to the OEM strangler. Also, my fuel economy improved (once I removed my lead right clog)blush.gif

This say to me that there is a fairly significant hike in torque when the restriction is removed, and I'm sure there is a decent HP increase to go with it.

Makes perfect sense, but did you notice much of a difference when you did the cat back later?

Thats what I'm wondering. Seeing the difference between OEM and after market dump pipe and mid pipe, I know they'd make a huge difference on their own. Just curious what a cat back adds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...