Jump to content
SAU Community

Recommended Posts

My definition of Side stepping is;

- Hold the clutch pedal down

- Bring engine to desired RPM

- Move your foot sideways off the clutch ("sidestep") and let the clutch spring take over

All it does is let any little slackness close and let the whole drivetrain lean on the clutch so when you pop it you don't have the little tollerences bang closed. The clutch won't do anything harmfull in comparison to the actual clutch drop

can someone please explain side stepping?

i got a 1.89 60ft by dropping the clutch at 7k with wheel spin all of first on the limiter lol. ran a 12.1

got 315 rwkw with 255/35/18 profile tyre. kept pressure at 36 because it was still bogging down at 6500 rpm .

with my setup how would use do it?

What brand tyres where they cheapies or actual quality?

Reason i ask is my mate cracked a 12.3 on a 34R with nothing but 1.2bar boost on the stock ceramics and a full exhaust with Bridgestone RE01's (still running std injectors, fuel pump, ecu). It was only about 255awkw from memory too.

So is launching the car in 2nd the way to go? Or is that only if you have a certain amount of power at the wheels. Ive got just over 280 awkw so would it be best in first or second?

  • 1 month later...
  • 1 month later...

www.youtube.com/watch?v=l_eR-39CK9Y&sns=em

Hey Xklaba u remember me beating u a few years ago in my old GTR?

Man i suck at Embedding vids with my phone. Have to copy to address bar

yeah I remember, and that smoke was number 2 piston going bye bye, I had run 11.36 before that and I have sence run 11.13 with only 293rwkw and stock turbos :P

hand brake is the best way IF you have a good clutch, other wise no hand brake dial in 7000-7500 and just find friction piont then ride out works for me

second gear launchs in standed ratio 34 or 32 and 33 with 4.33 diff ratios other wise use first and short shift to second

  • 2 months later...

^^ how i launched afew weeks back, although only took it to 6800rpm to launch, finding the friction point then riding out gets best traction and 60ft times too

gonna try 7000-7500rpm next time and see what difference it makes

what sort of tyre pressures did you run XKLABA ?

street tyres ( 265/35/18) I run 30 psi, you need the pressure to keep the centre of the tyre flat on the ground with even pressure across the tread and since the side walls of low profile tyres don't twist/flex there is no advantage to lowering the pressures, all it does is make the side walls take the weight and reduce the grip in the middle of the tyre

Drag tyres, ( 255/50/16 Toyo TQs ) 18-20psi, opposite of the street tyre reasoning

bahaha, standard ratio R33 GTR, use first and short shift into second, even with stock turbos that get 19psi by 2800rpm it's hard to keep it on boost on a second gear launch, so much so I don't even try it anymore and I reeeaaally hate clutchs

best last night for me was 11.3sec again, but this time with a 127.5mph....7500rpm clutch slip seemed to work good and not bog down....traction was abit of an issue though :/

going drags is getting addictive

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...