Jump to content
SAU Community

Recommended Posts

Why don't you stop Trolling and f#$k off back to the Flat capper section. Oh sorry you in Marks thread........you'll fit here!

:P

Screen shot 2013-09-02 at 9.08.41 AM.png

How are your pink racing stripes nismo boy ?

:P

How are your pink racing stripes nismo boy ?

:P

Mate if you dont have anything to contribute to this thread f**k off hey. Dont need you or your trolling bullshit on my thread.

If we need a dickhead ill hola!

How are your pink racing stripes nismo boy ?

:P

don't have pink stripes nummers.....you need to keep up with times if your coming around here to Troll.

What you driving now, behind the keyboard tough guy! wasn't some POS POVO pack Merc supplied by you company!

There's a lot of bitchin going on in this thread, not a lot of progress. 22 pages dedicated to a 4 door, and still no turbo... :domokun:

Well if that sunkist guy the useless f**king pin head his would rack off and stop trolling the crap out of everyone. JoshM35 also doing the same thing (its not funny mate, dale is the witty one here. Primary school kids have better comebacks) it wouldnt be 22pages long.

This is my build thread page guise, the one i put little bits and pieces that i have done/achieved and bought to further my project along. If you wanna troll and act like a complete twat. Go elsewhere.

If it doesnt stop im not going to update it and yous wont see anything that happens or goes on and only a few of you will get to see it and those who dont live close wont.

Edited by Howaitonaito

Hahahahahhahahahahahahahah f**king hook line and sinker. Jeez you're a cry baby aren't ya, maybe it's the that tampon is a little to tight for ya vagina.

Just quietly, I've been around these parts a lot longer than you, if you go through your own thread, I have previously posted. Going even further back to this being a "build thread", well - there is a section for that, not to mention you posting your abomination of a v35, in the Stagea section.

Was actually going to ask for more pics because I was interested in what you've done, but, judging by your attitude the 'build' quality of your car can not be better than a swagilistic hella flush person like your self's view on life.

Wasn't going to go into it, but you're wayyyy to easy.

Cheer up pumpkin

Im not a cry baby. Unless you wanna post legit questions about the build and what not get off. Simple as that and from the last few things you have posted you havent.

Your two years older than i am......that "alot longer"

I posted my "abomination" of a V35 in the stagea section because if you have ever been in the V35 section, 90% of them are idiots and wouldnt care less.

"i was actually going to ask for more pics. Because i was interested in what youve done" bullshit is as fake as a hookers smile mate, dont give me that crap.

But no worries sweetheart ill keep that in mind and hey if your nice i might blow you a kiss :-)

Edited by Howaitonaito

don't have pink stripes nummers.....you need to keep up with times if your coming around here to Troll.

What you driving now, behind the keyboard tough guy! wasn't some POS POVO pack Merc supplied by you company!

Don't make me bring out the protein shakes bro
  • Like 1

Im not a cry baby. Unless you wanna post legit questions about the build and what not get off. Simple as that and from the last few things you have posted you havent.

Your two years older than i am......that "alot longer"

I posted my "abomination" of a V35 in the stagea section because if you have ever been in the V35 section, 90% of them are idiots and wouldnt care less.

"i was actually going to ask for more pics. Because i was interested in what youve done" bullshit is as fake as a hookers smile mate, dont give me that crap.

But no worries sweetheart ill keep that in mind and hey if your nice i might blow you a kiss :-)

95% of v35 owners are idiots, then you should fit right in.

Have you taken the time to go through your thread? Noopppe, if you did, perhaps you would see that I had tried to actually answer your questions about your car. But your yolo tweeny attitude won't let you actually back up your argument about my "non informative" post's

And ofcourse I'm not going to post anything useful by your initial reaction of what I said to someone else( who I've also known for quite a while). A fly couldn't even pass your nose without you breaking into tears.

Even the people in your thread cannot take you seriously, if they did, there wouldn't be pages and pages of dribble and useless shit in here.

You also stated earlier, half the useless crap in this thread isn't the cause of yourself. Which also leaves the other half to be your uselessly posted shit. Time to practice what you preach.

Now man up, drop a vq25det in the thing, get Scott to mod the fuck out of it, wipe your eyes and get on with it.

Also, post some fucking pictures! The past 5 pages don't have any.

Remind us where your Stagea is Aaron?

Must be an epic build you're doing... :whistling:

LOL I honestly think it is sitting somewhere in traralgon rusting because the guy that blew it up hasn't yet fixed it.

So wait; you don't actually have a Stagea, yet you're bagging a guy who's actually Stagea'ising his car?

I am confuse; do you even Nissan?

Yeh. Times are fun.

I wish I nissaned. I wish I still stagea'd to be honest. Had a dream that Scott gave me another Stagea. That was great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...