Jump to content
SAU Community

Recommended Posts

Yeah as above, make sure its on the return line. Shouldnt have any issues with flow really, there shouldnt be much pressure drop through the cooler and the pump should be able to push the oil through a cooler. Remember it does push the oil back uphill when it returns to the reservoir anyway

Random plug is the power steering pressure switch. Basically tells your ECU that the power steering is active and the ECU compensates to keep the revs steady

I don't really see that being a problem (besides maybe the cooler not being in the 'coolest' place), you shouldnt have any issues with feeding oil back. The cooler (once full) is not alot different to it just being a hose. There is probably a slight amount more restriction, but seems weird that you are having issues with this setup

Weird eh? Mine runs exactly the same and it runs perfectly.

I didn't even bleed it, just started the car and turned the wheel back and forth at the same time topping up thr reservoir. Happy days, perhaps see if there's a blockage somewhere.

I've done the same setup on another car years ago, no dramas there too (although was a poster street car that never saw the track).

  • 1 month later...

Matthew, I got quoted around $100 for the single power steering pipe, however I wasn't sure that was the only thing leaking.

I ended getting the entire power steering piping swapped from another R34, cost about $400 with labour.

No more leaks.

  • 10 years later...
10 minutes ago, GTSBoy said:

Ever seen a sock on a PS reservoir in a Jap video and wondered why?

Not until I googled it, now I remember lol. Seems like it's just to clean it up. But it doesn't stop the leak, I have a leak issue though? Thinking whether I need a new bottle, surely not lol.

Fluid gets hot, expands, comes out the cap. The seal might be old, dry and cracked....but realistically, this is something that has been happening since long before the seals should be able to be considered to be old and dry and cracked.

A better PS fluid cooler is a helpful thing. I plumbed the trans cooler from an R34 into mine. Deleted the near useless loop of hardline in front of the radiator that Nissan thought would do the job.

23 hours ago, silviaz said:

Not until I googled it, now I remember lol. Seems like it's just to clean it up. But it doesn't stop the leak, I have a leak issue though? Thinking whether I need a new bottle, surely not lol.

If there's no rubber gasket you need a new cap. There should be a rubber gasket, depending on the car. If you are driving the car hard and the power steering is getting hot it will spit out of the reservoir. I have seen people tap the cap for a hose + overflow catch bottle placed somewhere that it will fit. 

9 hours ago, GTSBoy said:

Fluid gets hot, expands, comes out the cap. The seal might be old, dry and cracked....but realistically, this is something that has been happening since long before the seals should be able to be considered to be old and dry and cracked.

A better PS fluid cooler is a helpful thing. I plumbed the trans cooler from an R34 into mine. Deleted the near useless loop of hardline in front of the radiator that Nissan thought would do the job.

There is no seal, that's the thing.

3 hours ago, joshuaho96 said:

If there's no rubber gasket you need a new cap. There should be a rubber gasket, depending on the car. If you are driving the car hard and the power steering is getting hot it will spit out of the reservoir. I have seen people tap the cap for a hose + overflow catch bottle placed somewhere that it will fit. 

I'm not sure if skyline's have it, I haven't been able to find info on it.

3 minutes ago, GTSBoy said:

Hence why I didn't dwell on the seal aspect of the discussion and talked about why it overflows and what can be done to help.

Ah right, I wasn't going to mess around and install extra crap. Surely it should work right out of the factory lol

Edited by silviaz
On 7/28/2024 at 4:02 AM, silviaz said:

Ah right, I wasn't going to mess around and install extra crap. Surely it should work right out of the factory lol

What specific car is this? I know for sure my R33 has a rubber sealing gasket on the cap. Not unusual to get a bit of seepage from it either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...