Jump to content
SAU Community

Recommended Posts

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

-TOM- 's design looks awesome with the black red and backs of the 32 33 34 :)

Hehe thanks :)

Took some inspiration from Not a Pulsar's last submitted design.

6933959148_76425291c0_b.jpg

7080033529_d20e6e4e69_b.jpg

Gosh, getting it to look right is really hard..I'll touch it up when I'm not getting sodomised by uni obligations.

I think most the designs will work on white or black.

Don't know about actual coloured material though.

I personally only really like white or black, so should be right.

And black is slimming ;)

+1 for something like this.

An personal preference, I like white shirts over black.

Refined luke GTR's design a bit.

6936711670_0f9ebd801d_b.jpg

Also I traced the SAU logo, so it's somewhat vectorised. It's not perfect, but if anyone wants it PM me and I'll send it to you :)

Refined luke GTR's design a bit.

6936711670_0f9ebd801d_b.jpg

Also I traced the SAU logo, so it's somewhat vectorised. It's not perfect, but if anyone wants it PM me and I'll send it to you :)

damn you people and your skill.

thats what i had in mind.

thankyou for bringing it to life better than i ever could.

now a favor, the one on the left, on a black tee....

please????

Also looking for fashion style prints guys.

Things like a singular/multi car(s), engine bay shot, perhaps a car shot with a semi-revealed bonnet - all in B/W for the effect etc.

Something else to think about.

damn you people and your skill.

thats what i had in mind.

thankyou for bringing it to life better than i ever could.

now a favor, the one on the left, on a black tee....

please????

+1

dont want to change the sau colour scheme

damn you people and your skill.

thats what i had in mind.

thankyou for bringing it to life better than i ever could.

now a favor, the one on the left, on a black tee....

please????

Here ya go.

6937236056_8e809f4a03_b.jpg

Also looking for fashion style prints guys.

Things like a singular/multi car(s), engine bay shot, perhaps a car shot with a semi-revealed bonnet - all in B/W for the effect etc.

Something else to think about.

As for the fashion tees, did you still want to run the SAU logo/website somewhere, or should they not be included?

The SAU logo does not neccesarily have to be on there :)

But someone creative will be able to get a URL into it somehow i reckon. Even across the car windscreen or something.

Obviously the owner of the photo & car would need to approve it - however having their car across a t-shirt, i cannot see many complaints.

I feel like I'm whoring this thread..

Anyway, my attempt at a fashion tee. I built on my last design without the SAU logo (to make it more wearable and fashionable) and added a 32 and a skylinesaustralia.com badge on the bottom corner (inspired by hardtuned tees ;)).

Would you guys wear it? I'll start something completely different if people aren't feeling it.

7083639237_3884b19f59_b.jpg

7083665269_3890f707c3_b.jpg

6937552424_f5dca70051_b.jpg

Edited by -Tom
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...