Jump to content
SAU Community

Recommended Posts

words.gif

imagezjf.gif

Proudly Presents:

Import Monster SAU-Vic DECA Motorkhana ROUND 2 of 4 of the 2012 DECA CHAMPIONSHIP

When : Saturday 5th May 2012

Where : DECA - Shepparton, 145 Wanganui Road, Shepparton, VIC 3630

Cost : $85

Max Entries : 50 + Reserves

-= PLEASE NOTE =-

The insurer of the event (AASA) has issued supplimentary regulations that require all entrants to wear helmets during all competition. This includes the skidpan and all battles.

This also impacts passengers, as they must wear a helmet prior to entering a competition vehicle.

A fire extinguisher is required by all entrants. This is for your own safety.

Please re-read the supplimentary regulations before entering the event.

Entry Form & Supp. Regs.HERE

NO PAYMENT, YOU WILL NOT BE ON THE LIST

FILL OUT FORMS COMPLETELY. INCOMPLETE FORMS WILL NOT GO ONTO ENTRY LIST.

***Also, if you are emailing you entry, please name the attached file after your full name and what page it is. eg. 'Ryan Bell Disclaimer'.

Event Schedule: http://sau.ferni.net...ay2012Sched.pdf

Results: Not yet available

All withdrawles will be refunded after the event. Refunds will not be given after 5pm Monday 30th April.

Anyone paying by cheque MUST make the cheque out to Skylines Australia Victoria. Cheques made out to anything else WILL BE REJECTED.

Please support our sponsors : Import Monster Pty. Ltd. Factory 3, 6 Wigan Road Bayswater VIC 3153 (03) 9008 0031

  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

Entry List:

1. Import Monster

2. Import Monster

3. Leon Stapley 180sx

4. Ryan Bell 180sx

5. Mike Lowry 200sx

6. Ashley Stacey R33 GTR

7. Clive Small Lancer

8. Paul Stephenson EVO VII

9. Ekaterina Glebova EVO VII

10. Mario West EVO VIII

11. Jason Carey R33 GTS-t

12. Dean Course R33 GTS-t - you break it, you brought it. (in your case, you pay for it)

13. Campbell Shobbrook R33 GTS-t - you break it, you brought it. (in your case, you fix it)

14. Scott Andrew R33 GTS-t

15. Mark Ryan R33 GTS-t

16. Sean Power S14

17. Shane Janssen VXR

18. Megan Van-something VXR

19. Jett Benson 180sx

20. Chris Taylor 300zx

21. Daniel Taylor S14

22. Gary swift 180sx

23. Mathew Butters Pulsar

24. DaviDDDDDDDD Milano skyline

25. Brent Germain R33 GTS-t

26. Travis Eva S13

27. Michael Bourke VK

28. Lloyd Waldron MR2

29. Laith Graham R33 GTS-t

30. Thai long Chieu Corona

31. Josh Miller Corona

32. Jovan Atanasovski S15

33. The Bris R32

34. Robert Nigro R32 GTS-t

35. Andy Theobald GSR

36. Damien Nebel STI

37. Martin Sullivan S14

38. Jeremy Taylor S14

39. James Newton WRX

40.

41.

42.

43.

44.

45.

46.

47.

48.

49.

50.

Reserve:

1.

2.

3.

4.

5.

Will there be a Mega Wang like last time? (was awesome!!)

I saw in Officials section it says mini Wang.

I am on holidays interstate but will be getting to computer and fax tomorrow hopefully.

Will there be a Mega Wang like last time? (was awesome!!)

I saw in Officials section it says mini Wang.

I am on holidays interstate but will be getting to computer and fax tomorrow hopefully.

there are a few changes for this one :thumbsup:

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...