Jump to content
SAU Community

Recommended Posts

33 and 34 GTR's have the same cradle orientation. Mid tank. Whereas the 32 GTR and gtst's have the bottom of tank orientation.

The 32's and gtst's would have no problem with the walbro due to it being submerged all the time.

But if you had the completely enclosed walbro then no one would have a problem.

My believe was only the walbro with the bleed/prime holes have a problem due to not being submerged the entire time in the tank, 33 gtr 34's. This was tested when we took a walbro 400l with (the one with the priming holes) and submerged it in a jerry can, it pumped like a baws. But as soon as we left it out of fuel for 30min and went to retest (this time not submerging it) it did not want to pump until about 10 sec of running it. Now that is a lot of priming time for a RB, which led to our conclusion that the 400l was not suitable for a fuel tank that did not have the fuel pump submerged at all times.

Now Im the guy that has problems with weird shit, so it would not surprise me if Im the only 1 that has problems with it. But I did also contact walbro and they said the same as what I said in my above paragraph. Maybe they made a sleight change. Maybe im just unrucky.

Bosch 044 ftw haha

  • 4 months later...

to be honest, i think all pumps are fine with E85, it's just capacity that you have to worry about

i'm using a drop-in Nismo pump that's probably been in the car since... early 2000's? no issues with fueling on E85 for nearly 2 years now.

my old car has seen close to 5 years of constant E85 use with a drop-in Walbro (GT-T, walbro would be '07 vintage) no issues from that either.

i think the 'E85 specific' pumps might be a bit of marketing, with some minor changes

The E85 specific Walbro 400L has sealed pump contacts and plugs as ethanol can conduct electricity.

I always thought that pure ethanol was non conductive and that is was more a case of the contaiminets in the ethanol that are conductive. I mean if your saying that ethanol is conductive then you could also say that regular PULP is conductive to an extent.

I might have to test some E85 in our oil insulation resistance tester at work :)

  • 2 weeks later...

I wanted to buy one of those 400lph Walbro pumps but it says not for lightly modified vehicles. Im not looking into buying a small pump now then upgrade again in a short time space. By lightly modified is a car with an ECU,AFM,Exhaust and 550 injectors lightly mod?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...