Jump to content
SAU Community

Recommended Posts

Spotted hot CHICK say CHICKS friday night in hinley street drving a PINK 180SX.

I WAS LIKE :D

"hello pretty lady" out of my mates 1980s toyota corona (a.k.a white lightning)

She giggle with her friends n smiled :cheers:

(prob thought i was dick, ) ohh wellz

Edited by shorty_01
  • Replies 7.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I've seen that BMW with the wogs, tried to give me runs as well.

I idle it off the line fairly quickly using the 3ltrs torque, they then scream past as I change in to second at ~40km/h.

Idling it off the line with the 3ltr is as quick as a new ls2 297kw thing idling it off the line so its fairly punchy.  :D

lol sweet

i really would love to know my RWKW oh well 1 day

last meet we had when Vange had a sick radiator i had a little drag with the GTO from here and heard sum 1 mention he had 260rwkw and i took him but muffed 2nd gear so he very quickyly caught me

The GTO weighs 1689kg's

1689kg/258=6.58kg per kw.

R33 GTST would need around 210rwkw to be on par.

R32 GTST would need around 198rwkw.

Then the gear ratios will come in to play.

Approximate obviously. :O

Which is why my recent drive/thrash of a VT II R8 Clubsport 250i 6speed was so dissapointing. Lays some awesome first and second burnouts with a few rev's and clutch dump, perfectly smooth snakey's, unlike my R32's axle tramp. :D

Edited by Cubes
The GTO weighs 1689kg's

1689kg/258=6.58kg per kw.

R33 GTST would need around 210rwkw to be on par.

R32 GTST would need around 198rwkw.

Approximate obviously. :D

mine weighs 1680 also being GTS-4 4door

What are the Zenith Cradle bushes? Actual bushes or the solid alloy ones? HOW MUCH? :D

Also i'm keen on some steering bushes when I do my rack rubbers. :O

I was planning on buying the Noltec cradle bushes from UAS for $190 and throwing them in as my currents have only just finished leaking all the silicon goo out of them.. I'm dropping a gtr shimmed center in it at the same time.

On the dyno the rear wheels pull in towards the front of the rear guard, definitely a lot of movement there, looks scary.

EDIT: Also need a g/box mount :)

Edited by Cubes

yep, you are on the money Joel :

Chops' VY Calais has 249rwkw and did a 12.77 on slicks = approx. 1,600kg without driver = 6.43kw/kg

My S15/200SX has 197rwkw and did a 12.74 on RE540S = approx. 1,250kg without driver = 6.35kg/kw

However, as I always remind Chops, if I were to run on slicks, I would be able to do a heaps better launch and better my time by quite a few tenths. Even with RE540S on the back I could only launch at low 3ks rpm (otherwise I spun the wheels) - whereas I think with slicks (on a properly prepared track like he raced on) I could launch around 4,000rpm and fly off the line.

nah mate, unfortunately the guy that was dead keen on it (and had an RAA check done on it which came up A.O.K) has never had comprehensive insurance before, so he got ridiculous insurance quotes which he coudn't afford :D

So she is still for sale.

Mind you I don't mind too much, as my 34 won't be ready until mid-January.

However, damn the S15 is a fun car to drive - I am really enjoying it now I know she is to go soon. Whoever ends up buying it is going to get deal of the century since I've dropped the price to $33,000.

spotted a few nice cars 2nite...

saw a 360 mondena drag a bike on nth tce, was going the other way, would have been interesting 2 watch...the sound was awsome

spotted robiski parked on grenfell for 2 day lol

some guys in a taxi at the lights going 2 me to give them a show because they went to a hore house n didnt get any lol

on the note of kw/kg, wats a stock new integra type r? kept up with me, was in my blind spot n i was creaping away from him :starwars:

What are the Zenith Cradle bushes? Actual bushes or the solid alloy ones? HOW MUCH? :starwars:

Also i'm keen on some steering bushes when I do my rack rubbers. :)

I was planning on buying the Noltec cradle bushes from UAS for $190 and throwing them in as my currents have only just finished leaking all the silicon goo out of them.. I'm dropping a gtr shimmed center in it at the same time.

On the dyno the rear wheels pull in towards the front of the rear guard, definitely a lot of movement there, looks scary.

EDIT: Also need a g/box mount :)

Cubes here is the link to the NS.com site where the Zenith stuff are located

Cradle Bushes and Steering Bush

http://www.nissansilvia.com/forums/index.p...howtopic=131040

Engine and Gearbox Mount

$350 for both or $180 Engine Mount $195 Gearbox Mount

G/Box Mount

Mission.jpg

Engine Mount

NissanSilvia-ZENITHSteeringCradleBu.jpg

Bro In Law said for you to call him or email him and he can sort you out with a price for all!

Darren

on the note of kw/kg, wats a stock new integra type r? kept up with me, was in my blind spot n i was creaping away from him

the rev hard those integra's with variable vavle timing

Integra Type R

saw a black cefiro last night, guy said he bought it for $14k, was pretty sweet, he took off and i took off after him and caught him but as i cant rev my car like he could i barely got in front of him. Gotta get my comp in......

front all fixed now, trying out to see what eyelids look like....

post-23924-1135753209.jpg

Edited by black33_26

bit late, but late last thursday arvo about 5.30, had a black r32 gtr blitz it hard past me when i was heading into the hills around lenswood or somewhere like that. i was stuck behind 2 other cars and wasnt game enough to pass, but the gtr driver was a madman and passed all 3 cars on like tight blind corners! was even able to give me a honk as he went past!!! sounded wild and definitely had some serious balls!

if you're on here dude, i was the one in the blue/green 33 gtst driving like a grandma lol!

also passed a nice white r33 on the sturt highway in between sheaoak log and gawler on xmas day, gave him a wave, dunno if he saw tho...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...