Jump to content
SAU Community

Recommended Posts

I've finally decided to start with the cat back on my 33 GT-R - later on I'll finish it off with the Blitz front pipes and the Catco 3" cat.

I'm after something that will sound decent but not too loud. I do trackdays so definitely don't want something that will get me chucked out for being too loud.

What do people suggest between these two choices.

Any feedback is appreciated.

Neither. Get a custom job done. Won't be much more and the results will be alot better.

Can you please elaborate why would the results be better.

Few local guys i spoke to just offer x-force 3.5" setup - please recommend and exhaust place for a custom job

Can you please elaborate why would the results be better.

Few local guys i spoke to just offer x-force 3.5" setup - please recommend and exhaust place for a custom job

What's the budget?

Most jap systems have the '90 mm piping'... But have their crap 2.5 inch 'muffler' down the back!

I'd never buy a jap system again!

None of the jap systems will be over track noise limits. You'll be fine.

Racespace or Rob Sabbadin will be able to do a custom system for similar price i would image. Call em.

Imo there is little difference between the two u have mentioned. HKS has a nice note on GTST.

None of the jap systems will be over track noise limits. You'll be fine.

Racespace or Rob Sabbadin will be able to do a custom system for similar price i would image. Call em.

Imo there is little difference between the two u have mentioned. HKS has a nice note on GTST.

Disagree man.

The kakimoto on my car sounded like it had venting to atmo gates on it and in the end held the car back! FKN GARBAGE!

Custom job will cost about $400 more, easily.

You can't go wrong with either of the exhausts you've chosen, it's which one you like the look of more. I'd go the Blitz RX

Either of those choices are a waste of time without the rest of the system. Do dumps, front pipes, cat THEN cat back at the same time.

FYI I have dumps to tip all for sale soon. Has flown over 400rwkw.

Also swap turbos, ecu, injectors, fuel pump, build engine, add twin plate clutch-those are all things btw that have been covered on sau time and time again.

Custom job will cost about $400 more, easily.

You can't go wrong with either of the exhausts you've chosen, it's which one you like the look of more. I'd go the Blitz RX

Depends if the person is a "shop by quality/result" or "shop by price".

What's the budget?

Most jap systems have the '90 mm piping'... But have their crap 2.5 inch 'muffler' down the back!

I'd never buy a jap system again!

hmm - din't know that - when I saw 95mm piping on the HKS I simply assumed its all the way through.

Either of those choices are a waste of time without the rest of the system. Do dumps, front pipes, cat THEN cat back at the same time.

FYI I have dumps to tip all for sale soon. Has flown over 400rwkw.

Also swap turbos, ecu, injectors, fuel pump, build engine, add twin plate clutch-those are all things btw that have been covered on sau time and time again.

Cool - calling dibs on that system - since that's the end game for me anyway.

Could you pm me some details.

hmm - din't know that - when I saw 95mm piping on the HKS I simply assumed its all the way through.

The HKS for R33 is 95mm, but it tapers.

It starts at 3inch from the cat, hits the little hotdog muffler and goes up to 3.5 inch, then after the flange for the cannon it steps up again to 3.75inch.

Its the second exhaust i have owned thats done this. My old Mugen Twinloop exhaust on my ITR did the same thing.

I have the HKS on mine still with a GT30. For the street is a little loud, so have built a replacement middle section with another muffler for the road.

Heres the HKS Vs Apexi. Sorry the pic is a bit small, but you can kinda see the tapers, and that it is substantially larger than the apexi.

IMG_2226.jpg

IMG_2227.jpg

The HKS for R33 is 95mm, but it tapers.

It starts at 3inch from the cat, hits the little hotdog muffler and goes up to 3.5 inch, then after the flange for the cannon it steps up again to 3.75inch.

Its the second exhaust i have owned thats done this. My old Mugen Twinloop exhaust on my ITR did the same thing.

Another classic example of the Jap systems doing this 'taper up and down' rubbish.

My kakimoto - Full Mega N1 started off at 80 mm after the cat, into a muffler then up to 90mm then into the rear muffler which had an internal diameter of 63.5mm (or 2.5 inch). Absolute crap. Live and learn!

r33 rb25det 3" front and high flow cat, Hks silent hi power 102.9db at 4500rpm from 1 metre, not quiet like i was told.

also i have plans to do track days and i don't think it would get you kicked out, sounds mean on throttle :)

Edited by Stevoss

mine doesnt taper down. just up. and it hurts the power zero.

Have you looked inside to confirm?

They often have internal baffles, most of the Jap ones I've seen come through have them. Both my jap ones over the years have.

"3.5" exhaust, but with internal baffles around the 3"-2.75"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List: 1.Anna S 2. Luke S 3. Jesse Givens-Lamb 4. Luca Stamatescu 5. Madeleine Stamatescu    
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...