Trust Td06 Sh Experience

[Griffin]

Does anyone know anything about a td06 sh 25g? Im putting one on an rb25 neo in a vl . Im going to use an 8cm rear.

What results should i expect and what boost pressure with nistune and supporting mods?

[zebra]

I would use the 10cm rear housing

and expect upwards of 330rwkws when well setup

if you dont already have the turbo the general consensus is that the t67-25G is the better/more responsive turbo of the 2 with similar power

[Griffin]

already have it with the 8cm rear so will be going that way. How do you htink itll go?

[zebra]

fair enough, I would think it would choke just shy of 300rwkws on PULP

however there isnt any data I could find on using that turbo with the 8cm^2 turbine housing on an RB, I would try and get the biggest external wastegate you can find to try and relieve the exhaust manifold pressure as much as possible

[Griffin]

i have a 50mm hks gate, will be using stock manifold with the gate on top. Just looking for a fast street car, maybe to run 11s.

[zebra]

Cool cool

have a read through

http://www.skylinesaustralia.com/forums/topic/339433-lets-talk-td-06s/page__hl__td06

and

http://www.skylinesaustralia.com/forums/topic/347726-kando-dynamics-turbo/

[GTScotT]

Is it a trust or kando dynamic turbo?

Internal or External gate housing?

We can direct you to a new housing for cheap.

[ARTZ]

like this one u mean....:

http://www.ebay.com....=item43ae65a12c

pretty sure an 8cm wont get anywhere near 300kw on pulp..e85 might get you closer but not happily ...def get a 10cm

[GTScotT]

lol OMG IKR exactly like that one!!

Yeah dude, 8cm is going to do nothing but waste time. Better off with a highflowed stock turbo for sure.

Get the 10cm!

[STATUS]

go the 10cm, i have a 8cm vs 10cm graph posted somewhere.

[Griffin]

its a genuine trust one, that kinugawa housing looks good and will save me a lot of work, are they a straight fit to the trust chra? Are all parts between the 2 brands

interchangeable?

[GTScotT]

Yes the Kando turbos are direct trust copies, you will be able to buy that housing and bolt it up.

[Griffin]

just noticed that ebay housing bolts on, mine clamps on. Will the ebay one bolt onto my chra? can anyone confirm this 100%?

[ARTZ]

Bummer, nah u need a vband housing..

[GTScotT]

No im pretty sure that the housing is machined to suit the vband turbos. The turbos Vband ring will slot into the housing and the bolts hold it in.

Email Eiji to make sure.

[email protected]