Jump to content
SAU Community

Recommended Posts

Yeh mate, reverse lights is definitely best setup, it's pretty much unavoidable to use reverse every time you drive somewhere, but maybe a lot of guys won't have the car running with doors open...I just always warm it up and leave door open whilst shutting garage, and also have to open door as I park to make sure I'm in far enough, so it'll work good for me!

  • 5 months later...

sorry to revive an old thread, but i will be doing this tomorrow. i will get the 12v feed from the reverse signal wire i used for my reverse camera. seems like a very easy straight forward mod.

I thought the car was just heavy and had heaps of lag, but this should wake it up off the line.

You are on your own with that wiring, hopefully you don't have issues. Let us know how you go. I don't see what's so hard about flicking a switch once a month though...

You should be impressed stalling it up, but it is rarely noticeable on the stock turbo while driving. Once you go highflow turbo it's a requirement imo.

Just make sure you find the engine ECU, not the trans ecu in the kick panel. :P

all done and tested. i noticed it has improved on stall up a bit. i will be getting an exhaust done very soon, im sure that will make a big difference.

anyone know of a good exhaust shop in sydney that knows what their doing with the m35s? i would like a full 3 inch stainless system.

Scott, do you supply full bolt on exhausts or only the dump pipe?

all done and tested. i noticed it has improved on stall up a bit. i will be getting an exhaust done very soon, im sure that will make a big difference.

anyone know of a good exhaust shop in sydney that knows what their doing with the m35s? i would like a full 3 inch stainless system.

Scott, do you supply full bolt on exhausts or only the dump pipe?

Talk to Theo (WAGON BOY), he has a locally made (Western Sydney) system that is absolutely beautiful. A really nice note, no drone and excellent fab work.

all done and tested. i noticed it has improved on stall up a bit. i will be getting an exhaust done very soon, im sure that will make a big difference.

anyone know of a good exhaust shop in sydney that knows what their doing with the m35s? i would like a full 3 inch stainless system.

Scott, do you supply full bolt on exhausts or only the dump pipe?

I only do the dump/front pipes, unless the car is here.

  • Like 1
  • 1 year later...

You are on your own with that wiring, hopefully you don't have issues. Let us know how you go. I don't see what's so hard about flicking a switch once a month though...

You should be impressed stalling it up, but it is rarely noticeable on the stock turbo while driving. Once you go highflow turbo it's a requirement imo.

Just make sure you find the engine ECU, not the trans ecu in the kick panel. :P

i know this is an old thread but where you have switch to flick to clear code why not use a small momentary push button switch placed somewhere near gear selector so when you want it you just hold down the button launch. release it and everything is normal again no codes .

just an idea

i know this is an old thread but where you have switch to flick to clear code why not use a small momentary push button switch placed somewhere near gear selector so when you want it you just hold down the button launch. release it and everything is normal again no codes .

just an idea

Because you will still have to deal with the continual delay in throttle opening any time you use the brake.

Why press a button every time you want to bypass the delay, when you can enjoy life without it, and very occasionally establish the continuity of the circuit and touch the brake pedal for 5 seconds if/when the ECU light comes on.

  • Like 1
  • 2 months later...

Did my inner CV boot today and brake cut mod.

Jaycar $3 microswitch some bending of the feeler and a longer plastic screw to replace the one i took out of the shifter housing.

hyV9lGG.jpg

Edited by malialipali
  • Like 1

Nice one Joe, that should work fine. Let us know how it goes.

From what im reading the ECU will throw a code in a few 100 km if I haven't done it right. I measured and I have 12V over the switch when closed in Park with foot on the brake. Will see in a week or so.

Also if you guys want slightly more sensitive manual shift you can bend the feelers on the microswitches out a little. Did this on a J31 maxima my mum wanted a sportier shift :P .

Hi Folks, an update.

Done about 800km so far - no issues no codes thrown, and I can say with hand on heart that there is definite improvement on take off.

I actually feel confident doing tight handers with on coming traffic knowing I have proper throttle response.

For 3 bucks and about 40 min of my time figuring out the best way to bend the switch feeler etc this was a very worthwhile mod.

Can you write do up a quick sketch to show witing etc and if you can a link to the micro switch you bought.

Sure thing!

Excuse the 90 second iPad finger painting

1. Remove glovebox

2. Locate ECU

3. Unclip the connector from the ECU - pull down the black lever.

4. Unclip the lever by spreading it and pulling away

5. Remove the loom bundle cover (spread it with a flat blade screwdriver)

6. Unravel or skooch up the tape about 5 cm

7. Locate the pink/black trace wire - pin 55 ( the ECU pinout is on the forums here) , put a multimeter on the pin and prod the wire if unsure.

8. Cut and strip the pink/black wire , solder on lengths of wire for the switch. Lengths depend on how you will run it to the shifter box , I followed the existing wiring and drew it behind the deck.

9. Bundle in the new wiring and tape up to existing loom. Reassemble the connector and click it back on the ecu.

10. Slide off the shift knob and lift away the cover, put it aside (no need to unclip wiring)

11. The first plastic screw infront of the shift lever undo and use it to bore out the mounting hole on the microswitch http://www.jaycar.com.au/Electromechanical-Components/Switches/Micro-Switches/SPDT-Miniature-Microswitch/p/SM1038( shows as $4.95 online but I paid 3 bucks )

12. Bend up the feeler , can be done with fingers or long nose pliers - careful not to rip it off the switch.

13. Test fit with the longer plastic screw

14. Solder up as per photo above and diagram. Fix it back in place make sure that the switch closes when in Park.

15. Fire up the car (make sure it works :P) throw a multimeter/test light across the pins and tap the brake - test there is no 12v on the other side by moving the shifter.

Reassemble everything (maybe change your AC filter as summer is coming :) )

My fascia kit is on its way from Amazon US , when I install a new HU I will wrap and bundle the wiring properly , put some hotglue under the switch and over the soldered pins on the switch. For neatness and safety.

Shitty wiring diagram below. I have a CertIV in electronics but honestly couldn't be bothered firing up XCircuit ( 50+ hrs in the office). Ill happily do this for WA members just supply a switch and understand my schedule is hectic and no warranties apply as its a freebie.

2KiON1g.png

Edited by malialipali
  • 2 months later...

So i followed the above and installed the microswitch at the shifter. Only bit i can add to this thread that i had to use spacers below the switch to raise it of the plastic as the switch was hard up against the lever surrounds. A bit of 5mm hose worked well

post-77821-14515383780956_thumb.jpg

post-77821-14515383883674_thumb.jpg

post-77821-14515383985589_thumb.jpg

post-77821-14515384136003_thumb.jpg

post-77821-14515384293079_thumb.jpg

  • Like 3
  • 2 weeks later...

So on the way back from SA 100km out of Perth got a Engine Light, I think at that point we drove about 5hrs without having it in park.

First set of lights encountered, in park and about 3 seconds of brake pedal sorted it out.

What I noticed though was when the engine light came on and even when "cleared" the trans shifted weird at low speeds. Wasn't until the car was shut off and back that the shifting sorted it self out , could be coincidence though as Ive just hit 152k km and should flush the trans.

So i followed the above and installed the microswitch at the shifter. Only bit i can add to this thread that i had to use spacers below the switch to raise it of the plastic as the switch was hard up against the lever surrounds. A bit of 5mm hose worked well

Is it just me or does the wire you cut and stripped look red and blue not pink and black? I'm likely wrong, just something I noticed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...