Jump to content
SAU Community

Recommended Posts

Indeed, there are still some v710 new I think, but most are now v70a.

they are among the quicker tyres, especially on a lighter car. they were very popular when they were the IPRA control tyre about 10 years ago before they moved to the super expensive yokos. they performed better when buffed but I guess you don't want to bother.

one thing I found with v70A which may also be true in v710, high tyre pressures gave the best performance under the gtr. when I say high, I mean 42-44 hot which is outrageous

take them if the price is right

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332061
Share on other sites

Clinton has a set of these for the Mazda and they make it handle so much better than an old car like that is entitled to. The biggest issue he had was finding the right tyre pressure to match the light weight of the car as they seem to be pressure sensitive.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332332
Share on other sites

Both V710 and V70A are current tyres from memory.

I have not run these but Mark has run these on the S13 with very good success. They do like higher temps compared to most semis, 36-38psi (although these are not generally considered a semi, not a cams approved semi anyway). Mark estimated an improvement of 1.5-2 sec's a lap at EC and probably half that at Wakefield as compared to a similar sized V70A. Better braking, traction and cornering - which is expected when you look at the tread pattern. Longevity was also very good as he campaigned a set for almost 7 rounds! Other competitors say they are equivalent to an A050 medium or soft compound. For the price I don't think you can go wrong.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332377
Share on other sites

price has a lot to do with it as the AO50's or Hankooks are 2000 to 2500 vs these which are 1100. I tried to run these in the SAU Nats without much luck and you will have to run as a slick tyre in supersprints.

Different subject with CASM but i think they need to look at the rules as there is a smaller difference between a semi slick and slick tyre now.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332842
Share on other sites

with AASA - superTT and MX5 classes its run what you brought, Im up against blokes on slicks and semi's so yeah, these would be good!

for 219 a corner I think i'll give them a shot, although wont be running them till July at the earliest.

If I can go half a second quicker (vs r888) at wakie i'll be happy, that'll take me well into the mid to high 1.12's (shut up you sub 1.10 people! i have 75rwkw!) and would actually be competitive in superTT in a 10 lapper

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333162
Share on other sites

V710's are awesome. Best bang for buck and at just over $1000 even better value.

DO IT!

You won't regret it. I actually got 9 supersprint events out of 1 set. Only on the 9th event did the lap times drop off.

They still have life in them, just not as fast anymore.

On your light MX5 they will transform the car and you may get more life out of them.

Also against full slicks, they heat up quicker and you go faster sooner. Good for 5 laps but they can over heat if punished for longer.

Just remember they are designed as a autocross/sprint tyre.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333338
Share on other sites

A mate uses them on his S14 track car, 300-350rwkw or so - said they take a little more pressure hot than the O50 to perform well, reckons they are as good if not faster than the O50.

Then factor in the money side of it & they are good value when you considering the price of the others is almost double in some cases. You'd certainly think you could get .5 of a sec off going to them from R888s

Down here it's hit & miss if they will let you out with them in the wet, no idea what it'll be like for you guys up there as it seems to vary a bit between states/organisers. Be fairly certain if it was wet and at a CAMS event, no chance haha.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333634
Share on other sites

Brother has been using the v70A on the PRB Clubman for quite a few years now and very happy with them setting some great records 1:38 at the creek and 1:02 at Wakfeild. Winter time at Wakfeild Park a lighter car eg: clubmans and Lotus Elise can run the soft compounds if the budget can afford to have a spare set.

Jason Wright used the V710's on his WRX at one stage and dont think he went quicker that the V70A i would look at them for a MX5

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333765
Share on other sites

hmm..race formats are 6 laps 1st race, 8 laps race 2 and race is a ten lapper.

food for thought! thanks lads!

and yes, a wet track is something id have to consider as I dont have spare rims to have other semi slicks on. doh

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333839
Share on other sites

On the MX5 I reckon you would be able to do 10 quick laps with the V710's.

I was worried about running the V710 on a wet track also, but luckily last year I didn't get a wet event all year.

You could alway bolt on a set of street tyres if it rains.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6336212
Share on other sites

they're not road legal, just like all the other 2 groove "cheater slicks" from Hoosier and Hankook.

I bought my Kumho slicks when they were on special on FSport. They were a few years old. I suspect all their specials are older stock they want to move.

My "cheap" set of slicks cost me a front gaurd, front bar and a wheel repair and only completed 2 sprint before the blowouts started. They turned out to be the most expensive set of tyres I'd ever owned.

I had 2 blowouts and a delamination and have seen the exact same thing happen to others using Kumho semis and slicks. It doesn't happen to everyone who uses them, but I don't recommend Kumhos to anyone. Well, apart from the KU36 which copped a heap of abuse from my heavyweight Supra, but I wouldn't touch their semis or slicks ever again. Spend a bit more and get something that doesn't have the blowout question mark hanging over its head. Its not alot of fun when a tyre blows out as you turn in to a corner fully committed to it!

Edited by hrd-hr30
Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6337833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...