Jump to content
SAU Community

Recommended Posts

Hey guys,

Was changing my oil this arvo and noticed that my front driverside front driveshaft boot is in a word GONE. What would i need to fix this issue. You'll understand better when you see the pics.

http://img402.images...4/p5090010a.jpg

http://img401.images...12/p5090011.jpg

I'm in need of a passenger side inner boot if you find an aftermarket or oem part to fit. There are wraparound ones you can temporarily use if you get stuck.

That one is certainly the worst I have seen, did you find the boot?

Sorry to see that Josh,

I probably don't need to tell you, but get it seen to pronto. I was a tight ass and left the boots cracked and separated for a few thousand kms on a honda. Instead of costing me a few hundred, it cost me a lot more because the uni joints went. The click on turning/accelerating sound that you get from worn unis.

Sorry to see that Josh,

I probably don't need to tell you, but get it seen to pronto. I was a tight ass and left the boots cracked and separated for a few thousand kms on a honda. Instead of costing me a few hundred, it cost me a lot more because the uni joints went. The click on turning/accelerating sound that you get from worn unis.

Yeah im not driving it till I get it fixed. Crap timing as I was bout to drive it to cairns on friday for a holiday now I have to take the missos corolla seca.

That's the same one as failed on mine. I used these aftermarket ones: http://www.ebay.com.au/itm/220865687512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

You just need to specify the size you need at each end (~75mm & 27mm) & they'll send it to you within 1 or 2 days, at least it arrived that quick for me.

The boot was a couple of mm bigger than it could have been but the stainless ties held it OK (so I was told by the mech who put it in for me).

That's the same one as failed on mine. I used these aftermarket ones: http://www.ebay.com.au/itm/220865687512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

You just need to specify the size you need at each end (~75mm & 27mm) & they'll send it to you within 1 or 2 days, at least it arrived that quick for me.

The boot was a couple of mm bigger than it could have been but the stainless ties held it OK (so I was told by the mech who put it in for me).

Hard to fit leon? Thats great news thanks for the link. Do you know what your measurement was by any chance?

I decided the same thing. Only bought the CV boot so I could get it done in my timeframe rather than waiting for the mechanic to order it in. The good thing about you being in Brisvegas is your specialist with most likely have one on the shelf

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...