Jump to content
SAU Community

Recommended Posts

Wrecking complete R33, suspected blown head but not too sure, just don't have the time anymore to fix it.

Car has been sitting since April 2012 still street registered, body is straight besides smashed rear windshield from the recent storm that occurred in ACT.

PM for any parts or inquiries on the car.

Will let the whole car go for 2.5-3g.

Thanks !

  • 2 weeks later...

http://www.skylinesaustralia.com/forums/topic/410131-act-for-sale-mx73-cressida-perfect-cruiser-or-great-base-for-engine-conversion/

This!

No rego now....$1500 ono, comes with heaps of stuff I need the room so make an offer.

I can throw 3 months rego on for extra if you want. I don't have the space or time for it any more.

ARP Head Stud Kit Suit RB25DET, brand new only test fitted to block $150

Turbosmart Type 2 Blow Off Valve $50

RB30/VL Turbo Standard Setup, Original T3 turbo and Manifold, Dump Pipe Water and oil lines. Also have turbo plenum & runners also turbo brown top injectors all taken off running car,prefer not to seperate $800 taking offers

contact here or 0404429279

Best

1. to confirm coilpacks by swapping over with known good ones.

2. If it is coilpacks narrow it down to the one thats failing and replace it (one) or

3. If you have enough coin get some new splitfires for around $500. (if one has gone the others will follow soon after, one at a time - lol)

Not sure what the R33 S2 takes.

Your in Canberra ?

Best

1. to confirm coilpacks by swapping over with known good ones.

2. If it is coilpacks narrow it down to the one thats failing and replace it (one) or

3. If you have enough coin get some new splitfires for around $500. (if one has gone the others will follow soon after, one at a time - lol)

Not sure what the R33 S2 takes.

Your in Canberra ?

Yeah, I was going to do the 1by1 but I thought the rest will follow soon after, so was going to purchase a whole new set of splitfires. The R33 S2 takes a specific set (cannot use S1).

Yep, from Canberra.

OEM Nissan MCP-1330

Part # 22448-25U00

Are you sure it's the coils failing? Does it have a stock or aftermarket ECU? What Boost are you asking of it? Re Gap your plugs to a smaller gap ie. 0.8mm?

Oh and Welcome to SAU fellow Canberran R33 Driver. ;)

OEM Nissan Part Number is MCP-1330.

Are you sure it's the coils failing? Does it have a stock or aftermarket ECU? What Boost are you asking of it? Re Gap your plugs to a smaller gap ie. 0.8mm?

Oh and Welcome to SAU fellow Canberran R33 Driver. ;)

That is a very good question. I know very little about skylines / cars in general. (Just learning). I'll have to ask a mate of mine who will be able to answer the questions.

Before I bought the R33, the guy said he had tested a lot of things / replaced and seemed pretty certain that it was the coil packs.

I am currently running 1 bar or 0.8. PSR would be around the 8-9?

Thanks Rob, enjoying SAU so far, nice people around here. R33 is the way to go !

edit: It has new plugs as far as I'm aware (As of 3 weeks ago, pre-purchase).

edit2x The Mate: It's got a stock ecu, it's also running a dual stage boost controller which I think it's installed incorrectly. I also think the fact that you got 3x yellow jacks coils and 3x standards.

Edited by Jeremy90

Mismatched Coilpacks could be a thing, also if the ECU is Stock, any more than about 10psi boost, the ECU will freak out. search R&R (Rich & Retard). <<<------ aka Sinista :D

Airflow meter might need a clean also...

No probs. :)

What side of town are you on? If Northside I Could maybe assist?

I'm over at Dunlop. At this stage, I'm taking all offers haha. I'm only starting to learn about cars and decided I'd start with a R33 Skyline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...