Jump to content
SAU Community

Recommended Posts

Ok so im running out of space at my place so am selling all the stuff that i have pulled off the gtr since iv had it. this includes all the twinturbo crap, the only things you would need is turbos and water/oil lines, maybe a few nuts and stuff, but all the piping and exhaust stuff is there. pm me if interested.

Also have K's pods to suit gtr, bolts onto the afms. $80

I also have a spare plenum to suit gtr, no throttles or anything, just the plenum. $50

Standard GTR fuel rail. $40

2x Standard fuel regs $20 each

2x GTR Bov's. will only sell as pair. Pm me an offer.

poope you are no fun. i need a bit of stuff as previous owner hacked away at mine to add the atmos ones i have. Car will be going into ultimate tunes soon anyway to get a bit more done so ill take a proper look as to what i need when the front bar is off haha

4 SSR MK1's

Size: 15"x6.5"

Offset: +11 (Type B)

PCD: 4x114.3

Price: $650

Comes with a set of new shank nuts and washers to suit toyota wheel stud thread.

Since I got these I pulled out all the rusted nuts and bolts for the wheel centres and put new ones in.

One rim has a minor dent on the outer lip. Wicked wheels out in qbn should be able to fix it real cheap if you don't want to have a crack your self. If I get it fixed I will be asking a lot more for them.

These are great rims for an old school look and your missus can use them as a mirror to do her make up.

Photo085_zps5beb0c05.jpg

Edited by azathoth

I have some parts lying around forsale

Genuine GTR Door Sills - $250

post-100668-0-38415700-1361156780_thumb.jpg

Please pm if interested

So found out they are for a R34 GTR....

Going to put up on eBay pm if wanting this.

Edited by ScR33m3r

Series 2 R33 Front bar indicator/fog light combination

White lens covers,

Electrics work fine.

Light scratches from moving around on lens covers but easy to sand and paint over.

$180 ono

Pm if any questions or anything

post-100668-13674038368841_thumb.jpg

post-100668-13674038680154_thumb.jpg

R33 GTR Carbon fibre faced gauge din set.

Brand new been sitting around for a while

$250 ono

Pm any questions or anything

post-100668-13674039759231_thumb.jpg

post-100668-13674039987116_thumb.jpg

R34 GTR Door scuff Sills

Brand new

Thought they were for a R32 but didn't fit either R32 and R33

$250 ono

Pm any questions or anything

post-100668-13674042080277_thumb.jpg

Selling helga 96' R33 Skyline GTST - Have advertised on for $4250 with a decent amount of interest. I wouldn't want to go below $3,000 ono. as the car works perfectly fine and drives straight, pits just failed the chassis (among other minor things) - Can be registered in NSW, rego runs out 4th of May 13'. Not sure if I'm asking too much for $3,000 for SAU members but a starting price has been given. Cheers

Selling helga 96' R33 Skyline GTST - Have advertised on for $4250 with a decent amount of interest. I wouldn't want to go below $3,000 ono. as the car works perfectly fine and drives straight, pits just failed the chassis (among other minor things) - Can be registered in NSW, rego runs out 4th of May 13'. Not sure if I'm asking too much for $3,000 for SAU members but a starting price has been given. Cheers

interested in a 68 hilux?

plus a little cash your way?

needs paint attention, but mechanically very good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...