Jump to content
SAU Community

Recommended Posts

intake manifold (with injectors and fuel rail )

both rear lower control arms

clutch brake pedal plus master cylinders

cas

tail lights

fuel pump

adjustable front tie rod ends

take the lot for $150

s2 r33 front seats $100 for both

IMG_10201_zpsfb05993f.jpgIMG_10191_zpsd8f98250.jpg

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

3 out of 4 will line up, you just need to extend one of them an inch or so i think.

There is a write up on a few different forums IIRC

Passengers is really good, drivers has a slight split in the seam of the RHS of the drivers bolster but 20 cents worth of blue thread and a needle stolen from your nan should fix it. I shampooed them not long ago. I can take some pictures if you are interested.

PM'd you :)

Brand New Unopened 2" SPECO 533-03 Street Series BOOST GAUGE - $50.00 $40.00 pickup or $50.00 Posted.

post-78856-0-49856600-1384509169_thumb.jpg

Want it Gone.

Buy the flamin mongrel ya dream boats!

For the love of rajab. :worship:

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

17x8 and 17x9 35p OZ Racing wheels, have 235 and 255 used semi slicks.

$650

1403366_10152005768391387_202506468_o.jp

Water/methanol injection kit with water/methanol mix and methanol.

$300

1403293_10152008410736387_737375936_o.jp

Nissan Micra Super S 1995, has new clutch, nismo engine mounts, ball joints and driveshafts. No rego.

$1000

883196_10152005675656387_199988151_o.jpg

Bolt on supercharger setup for 1uzfe, needs intercooling or a new pulley made to lower boost from 22psi.

$3000

1093920_10151839688001387_293295834_o.jp

All located in Tuggeranong

0435 626 691

I want the micra, but no kesh :(
661 Carbon fibre full face pushbike helmet, size MEDIUM. Purchased brand new, worn 2 or possibly 3 times, never actually utilised (ie never had a crash while wearing). Minor cosmetic scratches sustained while moving house; in no way affects safety, you can barely see them. Helmet is the same as below picture.


$200, will post at buyer's expense


1448.jpg



Mace "swat jacket" body armour, unsure of size (can check). Worn only once, never utilised either. Comes with detachable armadillo-style spine protector. Same as pic below.


$150, will post at buyer's expense


p4pb5178452.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...