Jump to content
SAU Community

Recommended Posts

Skyline parts:

R33 gts-t airbox with enlarged cai/snorkel (used heat gun to reduce restrictions in snorkel). Brand new airfilter.

$100 ono

R34 Smic supported 210rwkw $50

R33 radiator flushed $50

R33 Bov no leaks $50

R33 side indicators $25

Pm for details

post-88652-0-10388700-1404817357_thumb.jpg

post-88652-0-74499400-1404817371_thumb.jpg

post-88652-0-11542900-1404817392_thumb.jpg

Would do you a special deal when the time comes to it if you pull them out yourself and help me chuck some stock ones in :)

if the timing works out ok absolutely.

will depend on if I have the ecu fitted up

unless you already have some stock ones

Wouldn't work unfortunately because although it's a 32 ECU it has a 33 chip in it. You could just pull yours out and send it to nistune and they will install a 32 one for you :)

That's cool. Was just toying with the idea :thumbsup:

Yeah when I get back I'll start working on the R34 and taking the parts off the R33 to sell.

Parts that will be forsale

- nistune R32 ECU with rpm window switch (to work with R33)

- 555cc injectors

- z32 AFM

- splitfire coils

And some other bits :)

sell me your radiator shroud :)

I have stock ones but they have been just sitting out not wrapped in a bag or anything. We will see how things go :)

Are the standard ones in a rail already, or just loose?

Because I'm rubbish at removing/fitting side feeds lol

Selling the RB20DET from my 4 door.

Was auto and still has the flex plate on it. Comes with most things such as the turbo, computer, etc except it doesn't have a coil pack harness. It looks like the wiring loom might have had a piggy back but that was before I owned it. I think kms was around 220,000. I have a new turbo gasket for it as well.

Asking $900 ono. It is out of my car and ready go.

hey guys..

i have a heap of R33 parts from a series one, and some little bits from a series 2. it was time to clean out the garage.

there is a heap of stuff like interior carpet, sunroof version roof lining, front (drivers bent on back due to accident) and rear seats.

plus a whole bunch of other stuff.

post-52730-0-41365700-1405041787_thumb.jpg

also have 3 mags. good to bling up a trailor maybe.. or just for the rubber. (205/40/17)

post-52730-0-08446200-1405041798_thumb.jpg

make me a reasonable offer for something you want/need and we can go from there. 0402 94 55 46

cheers.

Edited by dazman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...