Jump to content
SAU Community

Recommended Posts

Hi

I am about to have a full exhaust system done on my series 2, RS Four S.

Not sure at this point wether to get twin dump pipe or just a bellmouth.

I will also be getting a Blitz LM return flow intercooler installed and was wondering if I will need to have the car tuned with aftermarket ecu piggyback or maybe Nistune board.

Or will the car run fine with the standard ecu ?

Any help would be great thanx

post-93563-0-21462800-1336787141_thumb.jpg

Since you have a S2 you would benefit from getting a Nistune fitted and tuned. The car will run on the stock ecu but from stock they all run very rich and a tune will benefit economy and/or performance and help your engine live longer.

Do the exhaust and the intercooler first if you want and get the Nistune as soon as you can.

Yes if you can source an R34 GT-t PFC and run 3.7v to pin 51 on the ecu to get around traction control you can use a PFC.

If you just gut your existing cat you get the same thing for free. More power noise very slightly increased.

nistune is about $350 without the software (off the top of my head)

+ cost of tune

pfc is $1000+

+cost of tune

with an exhaust and no tune on 7psi my rs4s was making 135awkw

10psi and a nistune + tune will get you near 200awkw

a guy i know with another rs4s said the tune was the most noticable mod he has done so far

also, the cost of tuning a nistune would only be a little more than a piggyback but you will get much better results

I already have Greddy power extreme exhaust, blitz intercooler, Greddy oil catch tank, JJR bellmouth dump pipe all awaiting to be installed. I will also be getting Splitfire coil pack and from what your all saying is I need Nistune board fitted, boost controller and then a tune. What kind of power should I then expect to see ?

Hey mate, perhaps jump into the Forced Induction performance thread and have a flick through the recent pages of the RB25 dyno results. That will give you something to go off, and then you can see what to expect. With the stock turbo, people don't push too hard.

Have you bothered to read anything in your own thread? I swear this has been asked and/or answered already more than once.

And right there is the reason a lot of people don't get on these forums cause there's always someone who has to show some infant ism.

I am merely asking to clarify so as not to get told some bs from a workshop. After all isn't that what this is here for. C'mon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...