Jump to content
SAU Community

Recommended Posts

  • 1 month later...

So how we going with making a second run? i just got me an OX bar rear bar so figure i need a daleo front bar sooner rather then later

Would be a third run actually. ;)

I've got a bunch of ends machined; I just need to buy some more tube. Any other takers?

Would be a third run actually. ;)

I've got a bunch of ends machined; I just need to buy some more tube. Any other takers?

If you need more takers to do a run, I suppose I can take one. No hurry though.

Edited by Commsman

If you need more takers to do a run, I suppose I can take one. No hurry though.

You got the rear one Leon, and I'd say the front one is a lot more noticeable than the rear. So far anyway, but haven't thrown it around some twisties yet.

Ok, I'll get on it shortly.

Ryan; I do; but I've had very little spare time recently. The next month should see things settling down, and I can focus on this.

You got the rear one Leon, and I'd say the front one is a lot more noticeable than the rear. So far anyway, but haven't thrown it around some twisties yet.

Picked up the rear one from Josh when I was in Brissy yesterday (thanks mate!). Not likely to install either of them till I sort some other stuff out, & really time poor atm.

Really only bought it 'cause of the GB. And I also suspect the front one will be doing the lions' share of the work.

  • 2 months later...

I've been Slacking off with this for a while now; I'll be kicking off again in the next couple of weeks.

If you'd like to have one; either shoot me a PM or reply in the thread.

Cheers, Dale.

I've been Slacking off with this for a while now; I'll be kicking off again in the next couple of weeks.

If you'd like to have one; either shoot me a PM or reply in the thread.

Cheers, Dale.

I do!! Haha I'm away in Europe till the 19th of Feb. But want one for sure as soon as im home

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

Lol, yeah; I looked at the date of my last post & thought I'd better get cracking again...

I'm on it.

Lol, yeah; I looked at the date of my last post & thought I'd better get cracking again...

I'm on it.

OH NO YOU DIDN'T!!!

Front reo first! :P

Apparently Theo will be finished my front Bar at the end of this month!

Edited by Jetwreck

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

I do like the idea of Ox bar silver but yeah black is fine also.. Just want some stiffness!! haha that doesnt sound so good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...