Jump to content
SAU Community

My Series 2 Stagea (From The Uk)

tooleyrs4
 Share

Recommended Posts

tooleyrs4 Explorer

tooleyrs4

Posted
Posted

Hello Guys,

Thought i would drop by and say hello as there is alot of good info on this site :D

I will be using this as my daily / tow vehicle for my S15.

Car was stock when it came over from japan. So far i have fitted my ebc and a fmic now running at 0.8 bar.

Got r33 front and rear calipers to fit.

LPG conversion.

I put my Advans from my s15 on the stag. Going to swap for my spare 350z alloys though as I dont think it suits.

Now just need some masa wings so I can crack on with the r 34 conversion.

The intercooler was an easy fit to be honest just needed to cut away some of the bumper beam. The pipe work used the original wing mount openings.

c234f730.jpg

97783568.jpg

5ccce443.jpg

a0759adc.jpg

bcf852a9.jpg

Link to comment
https://www.sau.com.au/forums/topic/401917-my-series-2-stagea-from-the-uk/
Share on other sites
  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

tooleyrs4
tooleyrs4

Well i collected the car last night and i am over the moon with it. Just need to give it a good polish when the paint is settled and a full mop. The only point thats now playing on my mind is

tooleyrs4
tooleyrs4

Thanks! Papped.... Improved the bumper to bonnet gap again. Just waiting for the OEM seal to arrive. Its looking much better now

tooleyrs4
tooleyrs4

I was left with some panel gaps so i did some tweaking last night and it now looks much better. Passenger side before Passenger side after Driver side before Driver si

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Pretty sure there are a couple of LPG powered RS4Ts in Aus.

here's one:

http://www.skylinesaustralia.com/forums/topic/226938-lpg-stagea-rs4-series-2/page__hl__lpg%20stagea

I think your car will look better with the 350Z rims - haven't seen a three spoked rim that I like ever! Have seen a few Stageas with 350z rims - they go well.

  • 1 month later...
tooleyrs4 Explorer

tooleyrs4

Posted
  • Author
Posted

New wheels fitted the Advans are back on my s15.

I'm going to have to lower it now arnt I ?? :)

de2ed017.jpg

41f55082.jpg

3b407634.jpg

Some inspiration for me ! After my s15's roll cage is in I need a masa r34 conversion

1178747.jpg

Im also having some Fuel cut issue's

I have done some searching on here and i think i need to unplug another sensor.

I have an EBC fitted and every time the car boosts to my set level of 0.75 bar it drops off then fuel cuts :(

RS4StagMan Rising Star

RS4StagMan

Posted
Posted

Pretty sure there are a couple of LPG powered RS4Ts in Aus.

here's one:

http://www.skylinesaustralia.com/forums/topic/226938-lpg-stagea-rs4-series-2/page__hl__lpg%20stagea

I think your car will look better with the 350Z rims - haven't seen a three spoked rim that I like ever! Have seen a few Stageas with 350z rims - they go well.

Yes, that's my LPG Stagea, there are a few others that I know about including NM35's however they are all dual fuel.

  • 5 weeks later...
tooleyrs4 Explorer

tooleyrs4

Posted
  • Author
Posted (edited)

Started the R32 GTR brake conversion on the stagea the weeked.

Calipers arrived before bank holiday so I made a start.

B65C3082-3EAB-4A5B-A1AD-8834A71E6F7D-7614-0000090AE1A296D8.jpg

Started the R32 GTR brake conversion on the stagea the weeked.

FYI BnQ stock the 14mm od tube £3.94 for 2m worth. I tried every metal place then called to BnQ on a whim and result.

895CA440-3814-4FE7-BC1A-D84BEAB7851D-12936-0000109DC2732A86.jpg

I also bought longer M12 Bolts.

After you remove the caliper on the S2 you will find this issue.

4B2D8A78-27F8-4D6A-9FD4-A5E8AAB2B9EE-10881-00000D9C87A76FA1.jpg

0A18B6E2-013D-4E3F-95FD-DBCD97E7A9DA-10881-00000D9C8DFB5338.jpg

So use the 14mm OD tube and the longer M12 bolts to fit the calipers.

542D8A69-315F-4DCC-BE77-B9F61A5970CB-12936-0000109DC977FE69.jpg

Cut the pipe and slot the insert into the S2 knuckle.

I will update with the finished pics tonight. I have not started on the single pot rear's yet. I will take off the stock S2 rear caliper tonight and see what needs to be done. Lets hope it bolts straight on......

Edited by tooleyrs4
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Started the R32 GTR brake conversion on the stagea the weeked.

Calipers arrived before bank holiday so I made a start.

B65C3082-3EAB-4A5B-A1AD-8834A71E6F7D-7614-0000090AE1A296D8.jpg

Started the R32 GTR brake conversion on the stagea the weeked.

FYI BnQ stock the 14mm od tube £3.94 for 2m worth. I tried every metal place then called to BnQ on a whim and result.

895CA440-3814-4FE7-BC1A-D84BEAB7851D-12936-0000109DC2732A86.jpg

I also bought longer M12 Bolts.

After you remove the caliper on the S2 you will find this issue.

4B2D8A78-27F8-4D6A-9FD4-A5E8AAB2B9EE-10881-00000D9C87A76FA1.jpg

0A18B6E2-013D-4E3F-95FD-DBCD97E7A9DA-10881-00000D9C8DFB5338.jpg

So use the 14mm OD tube and the longer M12 bolts to fit the calipers.

542D8A69-315F-4DCC-BE77-B9F61A5970CB-12936-0000109DC977FE69.jpg

Cut the pipe and slot the insert into the S2 knuckle.

I will update with the finished pics tonight. I have not started on the single pot rear's yet. I will take off the stock S2 rear caliper tonight and see what needs to be done. Lets hope it bolts straight on......

You may find you have to trim the dust shield/stone guard whatever its called.
  • 1 month later...
tooleyrs4 Explorer

tooleyrs4

Posted
  • Author
Posted

Didn't have to trim the front shield but did on the rears. Looks like when I get the big brake upgrade for the front I will need to trim them.

R32 Gtr brakes fitted front and rear! Finally !!!

4FA5D8A7-C73C-4421-B004-463D2C3A9E26-4479-00000435E6C70A90.jpg

28E56804-18B0-4F90-A087-7BA6D2750A50-4479-0000043601386587.jpg

Will give the car a clean tomorrow and take some pics with the wheels on :)

Pics with wheels on! Just need to get the big front brake disc conversion and paint the Nissan part I the caliper :)

A5B1C350-75F8-4A0D-9B2A-FEADE24E0DFB-5053-000005622CCB73A7.jpg

EDD6418F-C2E0-4FD6-A759-4FA63C071362-5053-000005613F71127E.jpg

  • 2 years later...
tooleyrs4 Explorer

tooleyrs4

Posted
  • Author
Posted

Fitted some bc coilovers today! Not a lot of adjustment in the front shocks. They won't go any lower. Will need to raise the back a bit to level it out. Anybody else fitted these?


As for the ride they are brilliant :)


F30FFDF1-49A3-4E99-BD29-1F561E10EA03_zps


A8E6AF64-7E5E-4323-9CC8-B50C2BADCF30_zps


8FB709DB-DBB0-40F4-B22B-20E1C24B2D4D_zps

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...