Jump to content
SAU Community

Recommended Posts

Hi all,

I tried to go to the introduce yourself section of this forum but it comes up with an error msg. So seeing I joined to talk about & find out about Stagea's, I thought I would introduce myself here.

I once owned a 93 Skyline R33 sedan and loved it but it had some issues (bought it from a dodgy import dealer) so I got rid of it, then after the next non grey import and too much attention from the fuzz I got into four wheel driving to slow me down etc. So after a long time my love for fast cars has come back & now I'm a dad I needed something practical like the 4x4 but something to still enjoy and admire. Enter the Stagea....I just bought a low km series one auto Stagea RS4 AWD with Hicas :unsure: (Already looking at Hicas lock out bar)

So I have a few questions that I couldn't find exact answers too:

1. My Keyless entry doesn't work?, (I replaced the battery as I'm the first owner of this car in Australia)

2. Where can I get a workshop manual in English? (PDF format is fine)

3. Do these cars have a factory immobiliser?

4. Do Stagea's use OBDII diagnostics as I have a Scan Gauge II from my previous vehicle?

5. Where is the plug for the above?

Thanks for any help, it would be much appreciated.

post-95315-0-06524900-1339469895_thumb.jpg

Welcome, you will find answers to most of ur questions if u use the search function, just have to do a bit of reading. Just saying this cause ppl usually get flamed for asking question that hsve been answered a million times before, the answer to ur keyless entry should be in the stagea diy section

Welcome, you will find answers to most of ur questions if u use the search function, just have to do a bit of reading. Just saying this cause ppl usually get flamed for asking question that hsve been answered a million times before, the answer to ur keyless entry should be in the stagea diy section

I did do some searching but maybe not enough....thanks for the heads up!

Welcome, Nice stagea, The Stagea's always look the best with the dayz front bumper.

I like this body kit, the side skirts are a bit damaged though by the previous owner from Japan.

Hi

should be able to find workshop manual on ebay, no factory immobiliser.

I wouldnt put a hicas lockout bar on unless you get an aftermarket ecu as it will cause the stock ecu to think that your hicas is failing and may cause more ecu issues than its worth.. Thats the advice my mechanic gave me and he should know as he had a Stagea and did so with his...

Hi

should be able to find workshop manual on ebay, no factory immobiliser.

I wouldnt put a hicas lockout bar on unless you get an aftermarket ecu as it will cause the stock ecu to think that your hicas is failing and may cause more ecu issues than its worth.. Thats the advice my mechanic gave me and he should know as he had a Stagea and did so with his...

Thanks, I'll check out Ebay for the manual & thanks for the info on the lock out bar, but I already bought one.... Now I'll have to sort the ECU out, it never ends with modifying does it :rolleyes:

Just ordered the manual from ebay, thanks bjd. Where should I get a immobilizer fitted in the SE Brisbane area? I want to search the DIY section, but each time I get an error or it kicks me out back to the main forum page.... Moderators help needed!!!

A lot of info seems to have got lost/become inaccessible since the last revamp of the Website.

So far as I know the workshop manual has not yet been translated. There is an owner's handbook available. You can find R33 manuals online which take care of most of the mechanicals.

Does your central locking work? There is a tutorial on how to tune your key to the car but maybe the receiver is faulty.

The ecu is accessible via Nissan Consult not OBD - there are a number of aftermarket devices such as ecu talk

http://www.ecutalk.com/

that give you access mainly on a read only basis. The plug is behind the coin holder to the left of the fusebox.

HiCas delete should be the same as for the R33 so have a look in the skyline section (hopefully that is not broken too) and there are tutorials on getting rid of the hicas.

Thanks Kiwi,

I ordered a CD service manual off eBay today...

It's a shame all that info isn't accessible as its one of the reasons I joined this forum. Is it going to be fixed?? The Hicas lock out bar details have been explained to me. I will try searching the Skyline section for the other issues... Thanks again!

make sure you check the threads for the latest qld Stagea meet: confirmed for Sunday 24th June: would be good to have you along...

Thanks for the invite - I'll try and make it, but the day before the Stag is in the workshop getting coilovers, tie rods & Hicas lock out bar fitted. So hopefully it all goes to plan!?! Edited by Troppo

I'm in Brissy & have Nistune consult cable & software, I can come round & give you a hand if you like?

Thanks RB Bluey, if I can't get the central locking working I might take you up on that offer...

consult won't help with the central locking

it has probably had an aftermarket alarm/immobiliser installed at some point and they may have cut something

i'd be getting an adr compliant immobilizer fitted anyway as justcar won't insure you without one and most places give you a discount if you have one fitted

i'd be getting an adr compliant immobilizer fitted anyway as justcar won't insure you without one and most places give you a discount if you have one fitted

technically not correct, they will still insure you and take your money, but if it's not installed and you try to make a theft claim they will turn around and say no because it's one of our conditions that it is fitted. i really should get round to installing one in mine someday. :unsure:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...