Jump to content
SAU Community

Recommended Posts

25549xc.jpg

there you go boys, needs a bit of aesthetics, like wheels and a few more black bits but performance wise its pretty sick, has semi slicks on it and a high flow turbo, apparently 220kw but a dyno will tell me that next week once i can fiddle with the boost as its only 17psi on the high flow!

no one runs 18s on evos, ive looked around and talked to people and they all say the same thing, it creates to much unsprung tension.
its a sports car not a show car so i dont really care, plus tyres are heaps cheaper for 17s

25549xc.jpg

there you go boys, needs a bit of aesthetics, like wheels and a few more black bits but performance wise its pretty sick, has semi slicks on it and a high flow turbo, apparently 220kw but a dyno will tell me that next week once i can fiddle with the boost as its only 17psi on the high flow!

Is that an aftermarket bonnet?

nope standard benji.

do they race theres yet? i still have to look into it as it may make 1/10th of f**k all difference, but i know smaller is better.

got a physics lesson off a wheel seller the other day who races his evo alot

nope standard benji.

do they race theres yet? i still have to look into it as it may make 1/10th of f**k all difference, but i know smaller is better.

got a physics lesson off a wheel seller the other day who races his evo alot

You can pass on this lesson next time I see you then

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
    • And now the bloody flapper is jammed slightly open. Lazy as all f**k in 3rd-5th (very hard to convince it to make much boost before you run out of revs), but will make 12 psi in 1st, which shouldb't be possible with a 5 psi spring and controller set to <10 psi. Methinks I'm lucky it jammed where it did, rather than fully closed. It's actually a well weird situation. Careful examination of what's happening in the back of that housing when the gearbox comes out and all the other stuff (injectors, AFM retune) is supposed to be done, next week.
    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
×
×
  • Create New...