Jump to content
SAU Community

Recommended Posts

HI,

I have a Damaged R32 GTR that I am wrecking. I was going to fix it but I found a shell and transpalnted bits and pieces.

No motor, box or harness, most other parts are availible.

I am Located in Sydney, I can post items at buyers expence.

Plese let me know if you are after a part not listed i will take pics and post.

Fuel setup was on and up and runing for less than 3000ks befor I lost it and heres whats left:

Under car custom surg tank, Tank fits on drivers side under car near back seat. It has 3x -6 and 2x -8 weld on bungs, was bolted to floor via Nut serts.

Dash fittings: all earls swivel except for speed flow one way valve

-6 2x straight, 1x 45deg,

-8 2x straight, 3x 90deg, 1x 180deg, 1x coupler, 4x hose clamp ends, 1x adapter to fit 044, SpeedFlow one way valve fits 044 and has -8 end

Earls Auto-flex hose lenths are a min of of -6 1m 1.1m and -8 31cm, 32cm 48cm, 72cm 1.2m 1.3m

1x 044 pump

1x Golan -8 fuel filter http://www.golanprod...om/filters.html for info.

6x 660 Rochester Injectors.

Get it all for $800 lot.

I have a passenger rear passenger quater pannel that I got to fix the car $200.

Front seats $400/pair. Drivers seat has some cuts/rips on it.

2x AFM and Apexi air pods $120

Doors (just the door itself and window/motor mechanism) $200 each

Stock R32 GTR twin turbos with manifolds heat shields - were perfect when i pulled them off the car but have been sitting around so i would suggest rebuild. $150

Rear Diff $350

Front Windscreen $150

Rear windscreen $150

Quarter windows $50 each

Best to just ask what your looking for and make an offer.

I will add to the post tomorrow

post-61876-0-33889300-1339837297_thumb.jpg

post-61876-0-57707800-1339837313_thumb.jpg

post-61876-0-54864600-1339837458_thumb.jpg

post-61876-0-30786700-1339837478_thumb.jpg

post-61876-0-16615900-1339837488_thumb.jpg

post-61876-0-95358900-1339837504_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/402696-wrecking-damaged-r32-gtr/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Hi,

Rear quater - to repair car, I can take pics of drivers one on car now if anyone wants.

Front Seats - drivers is a little bit hows it going.

Door cards $50 each please look at pics,

Under dash trim with fuse cover - has a little glue residue on left side $30

If any one is interestid in the canon it was from a R33 GTR nice sound $100.

Spiro

0414 509 399

post-61876-0-45732600-1339898595_thumb.jpg

post-61876-0-94618800-1339898607_thumb.jpg

post-61876-0-19763800-1339898615_thumb.jpg

post-61876-0-19268200-1339898802_thumb.jpg

post-61876-0-92313600-1339898828_thumb.jpg

post-61876-0-15392500-1339898840_thumb.jpg

post-61876-0-30044600-1339898870_thumb.jpg

post-61876-0-17615000-1339898876_thumb.jpg

post-61876-0-99605000-1339898881_thumb.jpg

post-61876-0-43239800-1339898906_thumb.jpg

post-61876-0-46356800-1339898912_thumb.jpg

post-61876-0-70562200-1339898922_thumb.jpg

post-61876-0-64379300-1339899203_thumb.jpg

post-61876-0-20209800-1339899228_thumb.jpg

post-61876-0-49095000-1339899236_thumb.jpg

HI,

Sorry guys I’m 4 months into a 6month licence suspension and I work all around Sydney so I’m living with public transport ill try my best to get back to everyone but pics will probably be on saturday unless I get home early.

Hi,

I am willing to seperate the fules setup. Injectors $250, 044 $150, Braided lines and fittings - over 5m off lines and 10+ ends for $300.

also here are some more bits.

HKS Boost gauge. $30

Bonnet Lip $60

Brake Master $80

Clutch Master $80

Center Din Gauges $60

Dash Cluster $120

Side mirrors $50 each

Side Kick pannels $20 each

Rear Wing $70

Stering wheel, No horn $40. for all the ppl who asked i just found it.

Door Seals with ALL clips, little rip where window rubs on outer side inner guide side good. $35 Each.

post-61876-0-10681000-1340514224_thumb.jpg

post-61876-0-07539600-1340514307_thumb.jpg

post-61876-0-19967600-1340514356_thumb.jpg

post-61876-0-45121800-1340514494_thumb.jpg

post-61876-0-19613600-1340514541_thumb.jpg

post-61876-0-68590100-1340514573_thumb.jpg

post-61876-0-45117000-1340514669_thumb.jpg

post-61876-0-15272600-1340515191_thumb.jpg

post-61876-0-36178200-1340515274_thumb.jpg

post-61876-0-66278300-1340515369_thumb.jpg

post-61876-0-35052900-1340515965_thumb.jpg

post-61876-0-59643400-1340515966_thumb.jpg

post-61876-0-64578300-1340515967_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...